Cat® Belt 9L-6645 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Longueur de la courroie (in) / Belt Length (in): 62.52 Type de courroie / Belt Type: V-Belts - Cogged Largeur de la courroie (in) / Belt Width (in): 0.63
Online Products
Subcategories
There are 382 products.
Yacco ATF X FE is a fuel economy synthetic fluid for automatic transmissions.
100% synthetic fluid for automatic transmissions and power steering systems in passenger cars and light commercial vehicles. Particularly recommended for multi-speed automatic gearboxes (up to 8 and 9 speed transmissions) requiring a low viscosity ATF for better fuel economy and lower CO2 emissions.
Specifications
Yacco ATF X FE meets the specifications of the main OEMs and covers a wide range of uses (see table of specifications).
Contains 50 test strips. The acceptable Nitrite PPM level is between 1200 and 2000 PPM.
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 6V-8398 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 6V-8398 are detailed below.
Yacco ATF X is a synthetic fluid for automatic transmissions.
Lubricating fluid for automatic transmissions, power steering and hydraulic systems of many types of vehicles, such as passenger cars, light commercial vehicles, lorries, buses, construction equipment, agricultural equipment, boats, etc.
Specifications
Yacco ATF X meets the main OEM’s specifications and has a wide range of uses (see table of specifications).
Yacco ATF X can replace 3 types of our ATF fluids: YACCO ATF III, YACCO ATF D and YACCO ATF A while also adapted for many other applications.
For DCT (DSG) transmissions, refer to YACCO ATF DCT. For CVT transmissions, refer to YACCO ATF CVT.
CAT® Engine Oil Filters 1R-1808 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.
Designed to work specifically with the following Caterpillar engines models: 3116, 3126, 3126B, 3304, 3304B, 3306, 3306B, and see below for other compatibilities.
Available in two colors, yellow or white.
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 3J-1907 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 3J-1907 are detailed below.
CAT® Fuel Filters 1R-0749 / 389-0432 is designed to remove the small contaminants that cause the most harm to your Caterpillar Engines. Designed to work specifically with the following Caterpillar engines models: 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, C-12, C12, C15, C18, C30, C32, C9.3, 3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, and see below for other compatibilities.
The filter is available in two colors: White (ref. 389-0432) or Yellow (ref. 1R-0749).
Benefits:
- - Unique filter media providing unsurpassed protection
- - Acrylic beads preventing bunching
- - Spiral roving providing greater pleat stability and maximum dirt holding capability
- - Nylon center tube preventing metal contamination
- - Molded end caps preventing leaks
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 148-2903 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 148-2903 are detailed below.
CAT® Engine Oil Filters 1R-1807 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.
Designed to work specifically with the following Caterpillar engines models: C7, 3116, 3126B, 3304, 3304B, 3306, 3306B, and see below for other compatibilities.
CAT® Fuel Filters 1R-0755 / 389-0433 is designed to remove the small contaminants that cause the most harm to your Caterpillar Engines. Designed to work specifically with the following Caterpillar engines models: 3508B, and see below for other compatibilities.
The filter is available in two colors: White (ref. 389-0433) to match with your white engine room or Yellow (ref. 1R-0755) to comply with Caterpillar Yellow color.
Benefits:
- - Unique filter media providing unsurpassed protection
- - Acrylic beads preventing bunching
- - Spiral roving providing greater pleat stability and maximum dirt holding capability
- - Nylon center tube preventing metal contamination
- - Molded end caps preventing leaks
Cat® Belt 171-2321 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Longueur de la courroie (in) / Belt Length (in): 51.97 Type de courroie / Belt Type: Serpentine Belts Largeur de la courroie (in) / Belt Width (in): 1.12 Nbre de nervures / No. of Ribs: 8
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 3K-0360 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 3K-0360 are detailed below.
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 109-2332 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 109-2332 are detailed below.
Cat® Belt 9L-6648 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Compatible: 3196, 3408, 3408B, 3412, 3412D, 3412E, C-12, C12, and see below for other compatibilities.
Used on 4TB 3406 Engines and other variations.
Brand new housing