ENGINE FEATURES

- Certified by the Environmental Protection Agency (EPA) to conform to Tier III marine auxiliary standards.

- Closed cooling system

- Heat exchanger

- Oil drain valve

GENERATOR FEATURES

- Remote start 12-pin connector

- Voltage regulation of ±1.0%

- Rotor and stator are coated with a high-bond epoxy varnish. Varnish helps prevent corrosion in high-humidity areas.

- Copper windings ensure minimal heat buildup. Insulation meets NEMA standards for class H insulation.

- Direct connected to the engine, the generator has sealed precision ball bearings with a precision-machined steel sleeve in the end bracket to prevent shaft misalignment and extend bearing life.

CAT® Engine Oil Filters 1R-1808 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: 3116, 3126, 3126B, 3304, 3304B, 3306, 3306B, and see below for other compatibilities.

Available in two colors, yellow or white.

CAT® Fuel Filters 1R-1740 is designed to remove the small contaminants that cause the most harm to your Caterpillar Engines. Designed to work specifically with the following Caterpillar engines models: see compatibility below.

Benefits:

• - Unique filter media providing unsurpassed protection
• - Acrylic beads preventing bunching
• - Spiral roving providing greater pleat stability and maximum dirt holding capability
• - Nylon center tube preventing metal contamination
• - Molded end caps preventing leaks

CAT® Engine Oil Filters 1R-1807 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: C7, 3116, 3126B, 3304, 3304B, 3306, 3306B, and see below for other compatibilities.

Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

• Valise rigide professionnelle en ABS P300
• Equipée de 185 outils de qualité
• Châssis en aluminium anodisé avec protection anti-choc des bords
• Serrure numérique

CAT® Engine Oil Filters 1R-0716 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: 3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406B, 3406C, 3406E, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, 3516, C-12, C12, C18, C30, C32, and see below for other compatibilities.

Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)

Cat Extended Life Coolant is recommended in most Cat engines. Do Not Add Water to dilute.

• Factory-Fill - Used as standard factory-fill for all Cat engines cooling systems.

• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as 500% compared to conventional coolants. CAT ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal requirements.

• Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection of copper, solder, brass, steel, cast iron and aluminum.