3K-0360 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 3K-0360 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 3K-0360 are detailed below.
Applications: Ambient temperature fuel handling; High and low pressure LPG service; Hydraulic fluids (to 10,335 kPa/1,500 psi); Power steering seals; Radiator thermostat seals
Color Notes: Actual o-ring color may differ from image.
Compatible With: Abrasion resistant; Alpha-Olefin base synthetic lubricants; Ethylene Glycol; Hydrocarbon fuels; Petroleum base lubricants; Silicone oils and greases; Water, water base engine coolants; ORFS, STORS seals
Cross Section Diameter (in): 0.087
Dash Size (in): 908
Fitting Size (in): 3/4 16
Hardness (Shore A): 90
Inside Diameter (in): 0.644
Material: NBR (90), Nitrile (NBR), NBR - Nitrile
Material Description: Nitrile (NBR) rubber is capable of service temperatures of -40 to 100C and is resistant to fuel oils, gasoline, ultra low sulfur diesel fuel and lubricants. Nitrile rubber is not recommended for applications that require resistance to bio-diesel or coolant.
Not Compatible With: Automotive and aircraft brake fluids; High levels of ozone; Ketones; Phosphate ester fluids; Strong acids; UV light
Notes: Dimensions and material descriptions provided for reference only.
O-Ring Type: Straight Thread O-ring (STOR)
Outside Diameter (in): 0.818
Primary Sealing Material: Rubber
SAE AS568 Dash Size: -908
Temperature (°F): -40 - 212