Coolant

Filter By

Brand

Brand

Volume

Volume

CONSO Shop

Active filters

  • Brand: Caterpillar
  • Brand: Deutz
  • Volume: 3.7 L
  • Volume: 20 L
Caterpillar Extented Life Coolant 205-6612 - 20L
  • On sale!
Caterpillar

205-6612 Caterpillar Coolant Premix - ELC (20L)

€122.48
Availability: 89 In Stock

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).

Cat Extended Life Coolant is recommended in most Cat engines. Do Not Add Water to dilute.

• Factory-Fill - Used as standard factory-fill for all Cat engines cooling systems.

• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as 500% compared to conventional coolants. CAT ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal requirements.

• Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection

4C-4611 CAT
Caterpillar

619-8712 Cooling System Cleaner Caterpillar...

€112.61
Availability: 5 In Stock

Description:
Cat® Cooling System Cleaner - Quick Flush is for use as preventative maintenance or as a short-time flush at the time of coolant change.

Attributes:
Removes lime deposits, scale and solder bloom. Allows for one-step cleaning in just 90 minutes.

Recommended Application:
Not for use in removing large amounts of oil from cooling systems.

Cooling System Cleaner Restore Plus Fleetguard CC2638EDJ (5L)
Caterpillar

Cooling System Cleaner Restore Plus Fleetguard...

€70.72
Availability: 17 In Stock

Poorly maintained cooling systems, or using inferior coolant products, may result in cooling systems that are heavily contaminated with rust, scale, solder-bloom, corrosion deposits, oil/fuel or other debris which may cause fouling of the radiator and cooling system galleries and loss of heat transfer performance. Once a sytem is fouled or plugged flushing with plain water will not easily shift the contaminants.

Fleetguard’s Restore is an alkline cleaner and Restore Plus is a mild acidic cleaner which remove the contamination without harming harming the metal surfaces, gaskets, hoses or plastic parts.

The Plus-version from Restore is a mild acid based chelating cleaner

• Formulated to remove scale and rust deposits without disassembling your cooling system
• Can also remove oil, fuel and grease contamination and solder bloom
• Safe for aluminum radiator and heaters

The base-version of Fleetguards Restore is an alkaline based chelating cleaner.

• Most effective for removing silicate gel
• Highly effective forremoving oil, fuel and grease contamination
• More effective than automotive distributor detergent tablets
• Safe for aluminum radiator and heaters

See related items for the base-version of Fleetguard's restore cleaner.

How to use Restore and Restore Plus:

1. Drain the cooling system and safely dispose of used coolant. Isolate the filter (if fitted) and backflush the system with plain water.

2. Immediately add 1 litre of Restore or Restore Plus for each 10-15 litre of cooling system capacity and fill the system with plain water.

3. Turn heater temperature switch to high to allow maximum coolant flow through heater core. Blower does not need to be turned on.

4. Run the engine at normal operating temperature for 2 hours.

5. Drain and flush the system (x 2) with plain water. This may require more than one flush.

6. Refill with a fully formulated coolant (see related items).

7. Change your water/coolant filter if fitted and open the isolation valve.

Maximum recommended engine running time with any type of cleaner in the cooling system is 3 hours. Any prolonged usage may cause damage to system elastomers and corrode system soft metals.

This is Fleetguard's Plus-Version of the Restore-cleaner, 5L.