119-5152: CAT ELC (Extended Life Coolant) Extender

€17.32
Tax included Delivered within 1 to 2 business days

ELC® Extender 119-5152 ensures Cat ELC performance to 12,000 hours. It contains the same inhibitor package as Cat ELC.

Cat Extender 119-5152 is recommended in Cat products using Cat ELC, boosting depleted additives after 6,000 hours.

Cat Extender should be added at 300,000 miles for truck engines and 3,000 hours for machines and commercial engines. The system should be drained and flushed with clean water at 600,000 miles for truck engines and 6,000 hours for machines and commercial engines (no cleaning agents are required if you are already using ELC).

Quantity
Add to wishlist
In Stock. Same day dispatch before 12 p.m., with exceptions.

  Customer Service

Need help? Don't hesitate to contact us if you need further help selecting products.

  Worldwide Shipping

If you wish to deliver to a country outside of our transportation list, please contact us.

How to use:

The cooling system should be treated with approximately .946 L (1 quart) of Extender (part no. 119-5152) for each 45.5 L (12 gallons) of cooling system capacity at approximately a 3,000 service hour interval. Over treatment or under treatment of the Extender will not create any problems within the cooling system if it is kept within 15 percent above or below the normal dosage. Use the table that follows to determine the recommended amount of Extender to add to LLC.

 
Cooling system Capacity Recommended amount of extender
22-30 L (6-8 US. gal.) 0.57 L (0.60 qt)
30-38 L (8-10 US. gal.) 0.71 L (0.75 qt)
38-49 L (10-13 US. gal.) 0.95 L (1 qt)
49-64 L (13-17 US. gal.) 1.18 L (1.25 qt)

Other infos:

Container Type: 1 Quart Round Bottle

Volume Spec (in): 32

Volume Unit (English): fl oz

119-5152
36 Items

15 other products in the same category:

Availability: 5 In Stock

Description:
Cat® Cooling System Cleaner - Quick Flush is for use as preventative maintenance or as a short-time flush at the time of coolant change.

Attributes:
Removes lime deposits, scale and solder bloom. Allows for one-step cleaning in just 90 minutes.

Recommended Application:
Not for use in removing large amounts of oil from cooling systems.

Availability: Out of stock

Yellow VCS coolant

Specially formulated high performance coolant (OAT)

for new generation Volvo Penta engines.

The advantages of Volvo Penta VCS coolant:

• Prevents freezing and overheating.

• Guarantees maximum protection against corrosion, cavitation and the accumulation of deposits.

• Prevents any damage to internal engine components, thus optimizing its lifespan.

• Renewal period: every four years.

Availability: 37 In Stock

Cat® ELC incorporates an advanced technology with organic acid corrosion inhibitors for maximum copper, solder, brass, steel, cast iron, and aluminum protection.

Lowers maintenance costs by eliminating the need for supplemental coolant additives, extends coolant change-out intervals, and reduces disposal requirements.

Cat ELC is recommended in most Cat machine engines and machines . Add ion-free water to dilute.

Availability: 17 In Stock

Poorly maintained cooling systems, or using inferior coolant products, may result in cooling systems that are heavily contaminated with rust, scale, solder-bloom, corrosion deposits, oil/fuel or other debris which may cause fouling of the radiator and cooling system galleries and loss of heat transfer performance. Once a sytem is fouled or plugged flushing with plain water will not easily shift the contaminants.

Fleetguard’s Restore is an alkline cleaner and Restore Plus is a mild acidic cleaner which remove the contamination without harming harming the metal surfaces, gaskets, hoses or plastic parts.

The Plus-version from Restore is a mild acid based chelating cleaner

• Formulated to remove scale and rust deposits without disassembling your cooling system
• Can also remove oil, fuel and grease contamination and solder bloom
• Safe for aluminum radiator and heaters


The base-version of Fleetguards Restore is an alkaline based chelating cleaner.

• Most effective for removing silicate gel
• Highly effective forremoving oil, fuel and grease contamination
• More effective than automotive distributor detergent tablets
• Safe for aluminum radiator and heaters

See related items for the base-version of Fleetguard's restore cleaner.

How to use Restore and Restore Plus:

1. Drain the cooling system and safely dispose of used coolant. Isolate the filter (if fitted) and backflush the system with plain water.

2. Immediately add 1 litre of Restore or Restore Plus for each 10-15 litre of cooling system capacity and fill the system with plain water.

3. Turn heater temperature switch to high to allow maximum coolant flow through heater core. Blower does not need to be turned on.

4. Run the engine at normal operating temperature for 2 hours.

5. Drain and flush the system (x 2) with plain water. This may require more than one flush.

6. Refill with a fully formulated coolant (see related items).

7. Change your water/coolant filter if fitted and open the isolation valve.

Maximum recommended engine running time with any type of cleaner in the cooling system is 3 hours. Any prolonged usage may cause damage to system elastomers and corrode system soft metals.

This is Fleetguard's Plus-Version of the Restore-cleaner, 5L.

Availability: 89 In Stock

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).

Cat Extended Life Coolant is recommended in most Cat engines. Do Not Add Water to dilute.

• Factory-Fill - Used as standard factory-fill for all Cat engines cooling systems.

• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as 500% compared to conventional coolants. CAT ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal requirements.

• Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection

Availability: 39 In Stock

Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)

Use Promo Code FLUID-CAT for Free shipping for more than 25 drums of 20L.

Cat Extended Life Coolant is recommended in most Cat engines. Do Not Add Water to dilute.

• Factory-Fill - Used as standard factory-fill for all Cat engines cooling systems.

• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as 500% compared to conventional coolants. CAT ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal requirements.

• Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection

Availability: Out of stock

Orange VCS-2 coolant

Specially formulated high performance coolant (OAT) for new generation Volvo Penta engines.

The advantages of Volvo Penta VCS coolant:

• Prevents freezing and overheating.

• Guarantees maximum protection against corrosion, cavitation and the accumulation of deposits.

• Prevents any damage to internal engine components, thus optimizing its lifespan.

• Renewal period: every four years.

Remplace 22567314

Availability: Out of stock

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat Extended Life Coolant is recommended in most Cat engines. Do Not Add Water to dilute.

• Factory-Fill - Used as standard factory-fill for all Cat engines cooling systems.

• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as 500% compared to conventional coolants. CAT ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal requirements.

• Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection