Marine & Industrial Engines Parts & Service in South of France.
Français
Online Products
Subcategories
There are 1618 products.
From € 181 070 (excl. VAT)
Rating E - 1342 bkW - 1825 mhp - 2300 rpm / Yacht setting.
C32 ACERT propulsion engine ratings of 1925 mhp (1900 bhp) 1417 bkW, 1825 mhp (1800 bhp) 1342 bkW, and 1622 mhp (1600 bhp) 1193 bkW are available with heat exchanger cooling. These ratings are compliant for U.S. EPA Tier 3 Recreational, EU Stage IIIA, and IMO II. The 1600 and 1800 bhp ratings are also meet US EPA Tier 3 Commercial Standards. The engine configuration includes an air cleaner and CCV system as well as jacket water aftercooling. Additional features include a “plug-in PTO”, an MECP I control panel, and hybrid fuel lines.
Availability: Out of stock
Fuel filter for Volvo Penta original In-Board engine D.-MD.-MS.-TAMD.-TMD.
Availability: Out of stock
Replacement zinc anode 6L-2282 is used to protect metallic components from galvanic corrosion. This zinc is designed to work specifically with the following Caterpillar engines models: see compatibility below.
Attributes: Cat® parts are manufactured to precise specifications and are built for durability, reliability, productivity, less environmental impact, and reuse.
Availability: Out of stock
Oil filter for original Volvo Penta D.-MD In-Board Diesel engine.
Availability: Out of stock
Cat® Edge Bonded Seal 174-2475 is used in static sealing applications and is designed with rubber bonded to a plastic or metal carrier to prevent leakage and contamination.
Attributes:
Cat Edge Bonded Seals are designed for ease of assembly, high bolt load retention, and enhanced surface conformance to mating components. Cat Edge Bonded Seals are made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. Protect your investment with Genuine Cat Seals.
Availability: Out of stock
For Volvo Penta Diesel engines: D2-40 A, D2-40 B, D2-40F, D1-30 A, D1-30 B, D1-30F, MD2030, MD2040.
Kit contains part numbers:
861477 Fuel Filter
3840525 Oil Filter
22222936 Impeller
Availability: Out of stock
CAT® Fuel Filters 8N-0205 is designed to remove the small contaminants that cause the most harm to your Caterpillar Engines. Designed to work specifically with the following Caterpillar engines models: 3116, 3126, 3126B, 3176B, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3412, 3412C, 3412D, C32, C7, C9, D330C, D333C, and see below for other compatibilities.
Benefits:
- - Unique filter media providing unsurpassed protection
- - Acrylic beads preventing bunching
- - Spiral roving providing greater pleat stability and maximum dirt holding capability
- - Nylon center tube preventing metal contamination
- - Molded end caps preventing leaks
Availability: Out of stock
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 270-1537 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 270-1537 are detailed below.
Availability: Out of stock
CAT® Engine Air Filter 132-7169 is your best value for normal duty applications, delivering increased protection for the following Caterpillar engines models: see compatibility below.
Offering a long service life and exceptional filtration, Cat Air Filters are also environmentally friendly and cost effective. Designed to the exact specifications of your Cat equipment, genuine Cat Filters are a crucial factor in your machines ability to use air efficiently. A clean filter element protects internal mechanisms from being damaged by dirt.
Attributes:
- - Quick serviceability
- - Improved contamination control holds particulates during filter change
Availability: Out of stock
CAT® Hydraulic and Transmission Filter 9T-8578 is designed to maintain system cleanliness and integrity in most normal and light duty applications. Transmission-specific filters are designed to hold more contaminants and offer longer service intervals in these systems, so using the correct filter at appropriate maintenance intervals is critical. Designed to work specifically with the following Caterpillar engines models: see compatibility below.
Ensuring proper lubrication of your equipments hydraulic and transmission systems reduces repair costs and increases uptime for your income-generating iron, which is why choosing Cat Filters is a good business decision.
Availability: Out of stock
Availability: Out of stock
This kit contains:
3x 50484102 air filter
2x 50001400 sealing ring A 18 x 22 mm
2x 50001600 sealing ring A 22 x 27 mm
2x 1635210 fuel filter
Availability: Out of stock
Genuine Hate Starter for 2L41C, 2M41, 3L41C, 3M41, 4L41C, 4M41
Availability: Out of stock
Air filter Hatz for compatible models: 2G30
Availability: Out of stock
Fuel filter Hatz for compatible models: 1B20, 1B27, 1B30, 1B30V, 1B50, 1B50E, 1D30, 1D42, 1D50, 1D81, 1D81C, 1D90, 1D90V, 2G30, 2G40
Availability: Out of stock