Active filters

  • Brand: Caterpillar
  • Brand: Separ Filters
  • Brand: Yanmar
  • Brand: ZF
Availability: 40 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 148-2903 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 148-2903 are detailed below.

Availability: 40 In Stock

CAT® Engine Oil Filters 1R-1807 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: C7, 3116, 3126B, 3304, 3304B, 3306, 3306B, and see below for other compatibilities.

Availability: 38 In Stock

CAT® Fuel Filters 1R-0755 / 389-0433 is designed to remove the small contaminants that cause the most harm to your Caterpillar Engines. Designed to work specifically with the following Caterpillar engines models: 3508B, and see below for other compatibilities.

The filter is available in two colors: White (ref. 389-0433) to match with your white engine room or Yellow (ref. 1R-0755) to comply with Caterpillar Yellow color.

Benefits:

  • - Unique filter media providing unsurpassed protection
  • - Acrylic beads preventing bunching
  • - Spiral roving providing greater pleat stability and maximum dirt holding capability
  • - Nylon center tube preventing metal contamination
  • - Molded end caps preventing leaks
Availability: 40 In Stock

Cat® Belt 171-2321 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Longueur de la courroie (in) / Belt Length (in): 51.97 Type de courroie / Belt Type: Serpentine Belts Largeur de la courroie (in) / Belt Width (in): 1.12 Nbre de nervures / No. of Ribs: 8

Availability: 40 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 3K-0360 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 3K-0360 are detailed below.

Availability: 38 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 109-2332 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 109-2332 are detailed below.

Availability: 40 In Stock

Cat® Belt 9L-6648 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Compatible: 3196, 3408, 3408B, 3412, 3412D, 3412E, C-12, C12, and see below for other compatibilities.

Availability: 38 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 3J-7354 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 3J-7354 are detailed below.

Availability: 40 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 259-4600 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 259-4600 are detailed below.

Availability: 39 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 136-7227 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 136-7227 are detailed below.

Availability: 40 In Stock

CAT® Engine Air Filter 8N-6309 is your best value for normal duty applications, delivering increased protection for the following Caterpillar engines models: 3176B, 3412, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, C32, and see below for other compatibilities.

Offering a long service life and exceptional filtration, Cat Air Filters are also environmentally friendly and cost effective. Designed to the exact specifications of your Cat equipment, genuine Cat Filters are a crucial factor in your machines ability to use air efficiently. A clean filter element protects internal mechanisms from being damaged by dirt.

Attributes:

  • - Quick serviceability
  • - Improved contamination control holds particulates during filter change
Availability: 40 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 238-5081 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 238-5081 are detailed below.

Availability: 20 In Stock

Poorly maintained cooling systems, or using inferior coolant products, may result in cooling systems that are heavily contaminated with rust, scale, solder-bloom, corrosion deposits, oil/fuel or other debris which may cause fouling of the radiator and cooling system galleries and loss of heat transfer performance. Once a sytem is fouled or plugged flushing with plain water will not easily shift the contaminants.

Fleetguard’s Restore is an alkline cleaner and Restore Plus is a mild acidic cleaner which remove the contamination without harming harming the metal surfaces, gaskets, hoses or plastic parts.

The Plus-version from Restore is a mild acid based chelating cleaner

• Formulated to remove scale and rust deposits without disassembling your cooling system
• Can also remove oil, fuel and grease contamination and solder bloom
• Safe for aluminum radiator and heaters


The base-version of Fleetguards Restore is an alkaline based chelating cleaner.

• Most effective for removing silicate gel
• Highly effective forremoving oil, fuel and grease contamination
• More effective than automotive distributor detergent tablets
• Safe for aluminum radiator and heaters

See related items for the base-version of Fleetguard's restore cleaner.

How to use Restore and Restore Plus:

1. Drain the cooling system and safely dispose of used coolant. Isolate the filter (if fitted) and backflush the system with plain water.

2. Immediately add 1 litre of Restore or Restore Plus for each 10-15 litre of cooling system capacity and fill the system with plain water.

3. Turn heater temperature switch to high to allow maximum coolant flow through heater core. Blower does not need to be turned on.

4. Run the engine at normal operating temperature for 2 hours.

5. Drain and flush the system (x 2) with plain water. This may require more than one flush.

6. Refill with a fully formulated coolant (see related items).

7. Change your water/coolant filter if fitted and open the isolation valve.

Maximum recommended engine running time with any type of cleaner in the cooling system is 3 hours. Any prolonged usage may cause damage to system elastomers and corrode system soft metals.

This is Fleetguard's Plus-Version of the Restore-cleaner, 5L.

Availability: 40 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 112-3540 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 112-3540 are detailed below.

Availability: 40 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 2M-9780 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 2M-9780 are detailed below.