

2M-9780 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 2M-9780 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 2M-9780 are detailed below.
Applications: Ambient temperature fuel handling; High and low pressure LPG service; Hydraulic fluids (to 10,335 kPa/1,500 psi); Power steering seals; Radiator thermostat seals
Coating: PTFE coating protects the O-Ring from installation damage and provides ease of assembly.
Color: Red
Color Notes: Actual o-ring color may differ from image.
Compatible With: Abrasion resistant; Alpha-Olefin base synthetic lubricants; Ethylene Glycol; Hydrocarbon fuels; Petroleum base lubricants; Silicone oils and greases; Water, water base engine coolants; ORFS, STORS seals
Cross Section Diameter (in): 0.097
Dash Size (in): 910
Fitting Size (in): 7/8 14
Hardness (Shore A): 90
Inside Diameter (in): 0.755
Material: NBR (90), NBR - Nitrile, Nitrile (NBR)
Material Description: Nitrile (NBR) rubber is capable of service temperatures of -40 to 100C and is resistant to fuel oils, gasoline, ultra low sulfur diesel fuel and lubricants. Nitrile rubber is not recommended for applications that require resistance to bio-diesel or coolant.
Not Compatible With: Automotive and aircraft brake fluids; High levels of ozone; Ketones; Phosphate ester fluids; Strong acids; UV light
Notes: Dimensions and material descriptions provided for reference only.
O-Ring Type: Straight Thread O-ring (STOR)
Outside Diameter (in): 0.949
Primary Sealing Material: Rubber
SAE AS568 Dash Size: -910
Temperature (°F): -40 - 212
16 other products in the same category:
116-3260 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 116-3260 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 116-3260 are detailed below.
214-7568 Caterpillar O-Ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 214-7568 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 214-7568 are detailed below.
238-5081 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 238-5081 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 238-5081 are detailed below.
136-7227 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 136-7227 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 136-7227 are detailed below.
109-2332 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 109-2332 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 109-2332 are detailed below.
033-6031 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 033-6031 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 033-6031 are detailed below.
259-4600 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 259-4600 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 259-4600 are detailed below.
6V-8397 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 6V-8397 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 6V-8397 are detailed below.
9X-7317 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 9X-7317 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 9X-7317 are detailed below.
01182349 O-seal DEUTZ
2232840 O-ring Seal Deutz
Compatibility
511
912
913
914
238-5082 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 238-5082 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 238-5082 are detailed below.
112-1102 Caterpillar O-ring
Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 112-1102 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 112-1102 are detailed below.

Cat® O-Rings are used in static sealing and some dynamic applications.
Cat® O-Ring 2M-9780 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 2M-9780 are detailed below.