CONSO Shop

Active filters

  • Brand: Caterpillar
  • Brand: Yanmar
Availability: 22 In Stock

CAT® Fuel Filters 1R-0750 is designed to remove the small contaminants that cause the most harm to your Caterpillar Engines. Designed to work specifically with the following Caterpillar engines models: 3116, 3208, 3304, 3304B, 3306, 3306B, C12, C4.4, C9, and see below for other compatibilities.

Benefits:

  • - Unique filter media providing unsurpassed protection
  • - Acrylic beads preventing bunching
  • - Spiral roving providing greater pleat stability and maximum dirt holding capability
  • - Nylon center tube preventing metal contamination
  • - Molded end caps preventing leaks
Availability: 37 In Stock

CAT® Engine Oil Filters 1R-0739 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: 3116, 3126, 3126B, 3304, 3304B, 3306, 3306B, and see below for other compatibilities.

Availability: 37 In Stock

Cat® ELC incorporates an advanced technology with organic acid corrosion inhibitors for maximum copper, solder, brass, steel, cast iron, and aluminum protection.

Lowers maintenance costs by eliminating the need for supplemental coolant additives, extends coolant change-out intervals, and reduces disposal requirements.

Cat ELC is recommended in most Cat machine engines and machines . Add ion-free water to dilute.

From € 22 920 (excl. VAT)

Cat® C4.4 Diesel Marine Generator Set has three phase ratings of 50 Hertz at 38.0, 51.5, and 69.0 ekW with heat exchanger cooling and at 36.0, 49.0, and 65.0 ekW with radiator cooling that meet EU CCNR2 emissions standards. The C4.4 also has three phase ratings of 60 Hertz at 44.0, 58.5, 76.0, and 99.0 ekW with heat exchanger cooling and of 42.0, 56.0, 72.0, and 95.0 ekW with radiator cooling. C4.4 gen set is available in 12 or 24 volt as an open gen set or as an enclosed package. Single-side servicing improves ease of maintenance and lowers overall owner operating costs. The compact package size is ideal for a wide range of commercial and pleasure craft applications. These ratings also have Marine Classification Society approved packages available.

Availability: 40 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 109-7411 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 109-7411 are detailed below.

Availability: 988 In Stock

Replacement zinc anode 6L-3104 is used to protect metallic components from galvanic corrosion. This zinc is designed to work specifically with the following Caterpillar engines models: 3116, 3126, 3406E, D330A, and see below for other compatibilities.

Attributes: Cat® parts are manufactured to precise specifications and are built for durability, reliability, productivity, less environmental impact, and reuse.

Availability: 16 In Stock

CAT® Fuel Filters 1R-0751 is designed to remove the small contaminants that cause the most harm to your Caterpillar Engines. Designed to work specifically with the following Caterpillar engines models: 3116, 3126, 3126B, C7, C9, and see below for other compatibilities.

Benefits:

  • - Unique filter media providing unsurpassed protection
  • - Acrylic beads preventing bunching
  • - Spiral roving providing greater pleat stability and maximum dirt holding capability
  • - Nylon center tube preventing metal contamination
  • - Molded end caps preventing leaks
Availability: 70 In Stock

CAT® Engine Oil Filters 1R-1807 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: C7, 3116, 3126B, 3304, 3304B, 3306, 3306B, and see below for other compatibilities.

Availability: 40 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 6V-5103 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 6V-5103 are detailed below.

Availability: 32 In Stock

Replacement zinc anode 6L-2288 is used to protect metallic components from galvanic corrosion. This zinc is designed to work specifically with the following Caterpillar engines models: D349, D353C, D353D, D353E, D379A, D379B, D398A, D398B, D399, 3126B, 3208, 3406, C7, D336, D342, D342C, D343, D346, D348, and see below for other compatibilities.

Attributes: Cat® parts are manufactured to precise specifications and are built for durability, reliability, productivity, less environmental impact, and reuse.

Availability: 40 In Stock

Cat® Belt 9L-6641 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Longueur de la courroie (in) / Belt Length (in): 59.02 Type de courroie / Belt Type: V-Belts - Cogged Largeur de la courroie (in) / Belt Width (in): 0.63

Availability: 40 In Stock

Cat® Fuel Water Separator 513-4490 is designed to eliminate virtually all free water and 90% emulsified water along with smaller contaminates while helping extend the life of your fuel filter and sophisticated fuel injectors. This separator is designed to work specifically with the following Caterpillar engines models: 3176B, 3176C, 3196, 3412C, and see below for other compatibilities.

Attributes:

  • - Unique filter media provides unsurpassed protection.
  • - Acrylic beads prevent bunching
  • - Spiral roving provides greater pleat stability and maximum dirt holding capability
  • - Nylon center tube prevents metal contamination
  • - Molded end caps prevent leaks
Availability: 13 In Stock

CAT® Engine Oil Filters 1R-0726 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3512E, 3516, 3516B, 3516C, 3516E, and see below for other compatibilities.

Availability: 89 In Stock

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).

Cat Extended Life Coolant is recommended in most Cat engines. Do Not Add Water to dilute.

• Factory-Fill - Used as standard factory-fill for all Cat engines cooling systems.

• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as 500% compared to conventional coolants. CAT ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal requirements.

• Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection

From € 90 850 (excl. VAT)

Rating E - 747 bkW - 1015 mhp - 2300 rpm / Yacht setting.

The C18 ACERT marine propulsion engine has ratings for recreational applications that meet U.S. EPA Tier 3, IMO II, and EU Stage IIIA Regulations. This marine engine incorporates the latest core engine system innovations to provide maximum benefits in power density, performance, emissions, and fuel efficiency. Not only is it equipped with engine monitoring and protection features, it is also compatible with Cat display and vessel control systems.

Availability: 40 In Stock

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 6V-3917 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 6V-3917 are detailed below.

Availability: 37 In Stock

Replacement zinc anode 6L-2016 is used to protect metallic components from galvanic corrosion. This zinc is designed to work specifically with the following Caterpillar engines models: 3208, 3412E, and see below for other compatibilities.

Attributes: Cat® parts are manufactured to precise specifications and are built for durability, reliability, productivity, less environmental impact, and reuse.

Availability: 40 In Stock

CAT® Engine Oil Filters 275-2604 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: 3508B, and see below for other compatibilities.