There are no more items in your cart
The double-acting DEUTZ Clean-Diesel InSyPro® premium fuel additive works in two different steps:
- "Clean-Up" cleaning effect
- "Keep Clean" fuel stabilization
The 2-in-1 diesel additive for modern engines with high demands on fuel quality – specially designed for operation with biodiesel. Its stabilizing role increases the storage life of diesel, prevents deposits and ensures good starting, even after a prolonged shutdown. It cleans deposits in the injection and prevents loss of power and increased fuel consumption.
-
Clean-Up effect
(Recommended when changing oil and filter at 500 h)
- Dissolves deposits in injection components
- Normalizes high smoke density due to deposits
- Reduces fuel consumption while maintaining power
of the motor
“Keep Clean” Fuel Stabilization
(Recommended for use in standby mode and for prolonged downtime)
- Increases the storage life of diesel fuels and prevents deposits
- Reduces filter clogging and clogging
- Ensures safe engine start after long downtimes
Contains 50 test strips. The acceptable Nitrite PPM level is between 1200 and 2000 PPM.
The optimized alternative to the usual DEF/AdBlue®: DEUTZ PowerBlue improves the spray appearance of the urea solution in the exhaust stream with special active agents. This reduces crystallization and machine downtime costs. Particularly suitable for low outside temperatures, light load operation and frequent start-stops.
Diesel additive specially designed for critical applications with low fuel flow such as emergency generators or auxiliary generators. DEUTZ Start Boost increases diesel storage capacity and protects the fuel system against microorganisms. Ignition and starting reliability, even after prolonged shutdown, are increased thanks to a better cetane number.
ELC® Extender 119-5152 ensures Cat ELC performance to 12,000 hours. It contains the same inhibitor package as Cat ELC.
Cat Extender 119-5152 is recommended in Cat products using Cat ELC, boosting depleted additives after 6,000 hours.
Cat Extender should be added at 300,000 miles for truck engines and 3,000 hours for machines and commercial engines. The system should be drained and flushed with clean water at 600,000 miles for truck engines and 6,000 hours for machines and commercial engines (no cleaning agents are required if you are already using ELC).
The powerful additive to increase resistance to cold. DEUTZ FlowBoost reduces the minimum fuel operating temperature by up to 10°C and thus enables extended use of summer and transitional diesel. Additional special agents prevent the formation of large paraffin crystals and thus filters and fuel lines are protected against possible clogging.
The double-acting DEUTZ Clean-Diesel InSyPro® premium fuel additive works in two different steps:
- "Clean-Up" cleaning effect
- "Keep Clean" fuel stabilization
