Yacco Oil GALAXIE GT 10W60 (2L)

Yacco VX 300 SAE 15W50 is a semi synthetic oil for high performance gasoline and diesel engines. Suitable for all kinds of conventional and sophisticated gasoline and diesel engines (multi-valve, turbocharged, etc.). Particularly suitable for engines with significant running clearance or those suffering from excessive oil consumption . Compatible with LPG vehicles and/or those fitted with a catalytic converter.

Very low viscosity engine oil for highly supercharged diesel engines

DEUTZ DQC II-10 ACEA E7 API CI-4 

Yacco LUBE RN17 SAE 5W30 is a 100% synthetic “Mid SAPS” oil for gasoline and diesel engines. Specifically developed to meet the new Renault RN-17 5W-30 specification required by certain gasoline and diesel Renault engines manufactured from 2018 onwards. Backward compatible with older engines when the manufacturer is referring to RN0710 or RN0700 oils, except RS engines (Renault Sport). For RS and Alpine engines, use Renault RN17 RSA approved Yacco GALAXIE A SAE 0W40 lubricant . For diesel DPF engines up to Euro6d-temp series, use exclusively RN0720 oil (Yacco LUBE R 5W30). Can be used where SAE 5W-30 grade ACEA C3 oil is specified by the manufacturer.

VDS 4.5 is a high-performance heavy-duty engine oil providing outstanding protection and fuel economy. VDS-4.5 delivers improved engine cleanliness and protection against piston deposits through the use of high-quality base oils and additive components. VDS-4.5 is available in two viscosities. VDS 4.5 15W40 and VDS-4.5 10W-30. VDS-4.5 10W-30 is recommended for some newer engines (e.g. Stage V engines) to further improve durability and fuel economy.

Always refer to the operators manual/service bulletin.

Viscosity: SAE 10W-30

Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/CI-4/ECF-3/ACEA E9/E7

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

Yacco SUPER TRANSHYD 400 HV46 is a high viscosity index, anti-wear hydraulic oil.

Specifically designed for lubricating hydraulic systems used under severe service conditions. Available in several viscosities to meet OEM requirements and service conditions. Particularly recommended for construction equipment^* used outdoors, all year round.

Also suitable for forklifts, industrial equipment and with hydrostatic drive.

A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.

Viscosity: SAE 5W-40

Quality: ACEA C3, API SN

Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.

DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1

A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.

Viscosity: SAE 5W-40

Quality: ACEA C3, API SN

Yacco BVX LS 200 SAE 80W90 is a high-quality mineral oil for limited-slip differentials.

Specifically designed for 4WD vehicles. Lubrication of limited-slip differentials in sports and racing cars, lorries, construction equipment and agricultural equipment, where SAE 80W90 LS grade oil is recommended by the OEM. Especially developed for limited-slip differentials in 4WD vehicles.

It may be used in conventional differentials where API GL-5 extreme-pressure, SAE 80W90, SAE 85W90 or SAE 90 oil is recommended.

Very low viscosity engine oil for highly supercharged diesel engines

DEUTZ DQC II-10 ACEA E7 API CI-4

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine with aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CJ-4, CI-4 PLUS/CI-4, API SM

- Viscosity SAE: 15W40

Heavy Duty Diesel Engine Oil

Yacco Lube R SAE 5W30 is a 100% synthetic “Low SAPS” oil for diesel engines. Specifically developed for Renault diesel engines with particulate filters (which require a RN0720 oil), as well as for Mercedes-Benz engines that require the use of a MB-Approval 226.51 oil. Suitable for the latest diesel engines fitted with particulate filters in passenger cars and light commercial vehicles. Can be used where a SAE 5W30 grade ACEA C4 oil is specified by the manufacturer: Fiat (Talento), Infiniti, Mitsubishi, Nissan, Samsung (QM3), Suzuki (Grand Vitara ), etc.

VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.

Refer to the user manual.

Viscosity: SAE 15W-40

Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/

CI-4/ ECF-3 / ACEA E9 / E7

Old references: 23039848 / 23039851 / 23039853