3E-9840 Diesel Engine Oil DEO Caterpillar 15W40 (208L)

Yacco BVX 500 X SAE 75W80 is a synthetic high performance transmission oil. Multipurpose transmission oil suitable for all manual transmissions in light vehicles and certain types of commercial vans. Yacco BVX 500 X SAE 75W80 covers a wide range of uses and specifications. It is suitable for use in manual transmissions from a large number of car brands.

Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.

DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1

VDS 4.5 is a high-performance heavy-duty engine oil providing outstanding protection and fuel economy. VDS-4.5 delivers improved engine cleanliness and protection against piston deposits through the use of high-quality base oils and additive components. VDS-4.5 is available in two viscosities. VDS 4.5 15W40 and VDS-4.5 10W-30. VDS-4.5 10W-30 is recommended for some newer engines (e.g. Stage V engines) to further improve durability and fuel economy.

Always refer to the operators manual/service bulletin.

Viscosity: SAE 10W-30

Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/CI-4/ECF-3/ACEA E9/E7

Yacco BVX 600 SAE 75W90 is a synthetic high performance oil for manual transmissions.

Suitable for all manual transmissions (gearboxes, drive axles and differential gears) in passenger cars and light commercial vehicles where SAE 75W90 or SAE 80W90 oil is recommended by the manufacturer. Particularly recommended for the gearboxes and drive axles of modern vehicles with gear shifting issues during start up and highly stressed transmission units.

Yacco VX 500 SAE 10W40 is a synthetic technology oil for high performance gasoline and diesel engines. High-performance synthetic technology lubricant recommended for gasoline, diesel and LPG engines fitted with turbo or direct injection systems. Suitable for vehicles used for long motorway journeys under severe driving conditions and short journeys with frequent stop-and-go.

Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.

100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).

Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified.

Product discontinued and replaced by VDS 4.5.

VDS-3 covers even more stringent requirements on the cleanliness of the pistons and the displacement glazing compared to the VDS-2,

ensuring the longevity and reliability of your engine.

The high quality of VDS-3 oil allows, in certain cases, to increase the intervals of the drains.

Viscosity: SAE 15W-40

Quality: VDS-3, API CI-4, ACEA E5

Old references: 22479638 / 22479642 / 22479643

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine with aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CJ-4, CI-4 PLUS/CI-4, API SM

- Viscosity SAE: 15W40

A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.

Viscosity: SAE 5W-40

Quality: ACEA C3, API SN

VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.

Refer to the user manual.

Viscosity: SAE 15W-40

Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/

CI-4/ ECF-3 / ACEA E9 / E7

Old references: 23039848 / 23039851 / 23039853

Yacco Lube F SAE 0W30 is a 100% synthetic “MID SAPS” oil for diesel and gasoline engines. 100% synthetic high performance “fuel economy” oil for diesel and gasoline engines in passenger cars and light commercial vehicles. Specifically designed to meet the Ford WSS-M2C950-A and Jaguar Land Rover JLR.03.5007 specifications for diesel engines. Also suitable for diesel and gasoline engines that require the use of an ACEA C2 SAE 0W-30 oil. Compatible with Alfa Romeo, Fiat, Lancia, Honda, Iveco UV, Hyundai, Mitsubishi, Subaru, Suzuki, Toyota, etc.

Very low viscosity engine oil for highly supercharged diesel engines

DEUTZ DQC II-10 ACEA E7 API CI-4

LUBE F SAE 5W30 is a 100% synthetic fuel economy engine oil. LUBE F SAE 5W30 is specifically developed to meet the Ford WSS-M2C913-D & ST JLR.03.5003 specifications. LUBE F SAE 5W30 is suitable for most FORD & Jaguar Land Rover diesel /gasoline engines.* LUBE F SAE 5W30 is also recommended when the manufacturer recommends these FORD/JLR specifications or the use of ACEA A5/B5, API SL/CF oil (Honda, Kia, Mazda, Volvo, etc.).