Yacco Oil BVX LS 200 80W90 (2L)

Yacco TRANSPRO 40 SAE 15W40 is a mineral oil for diesel engines. Mineral oil developed to meet the strict technical requirements of Euro 5 & Euro 6 or Tier 4 & Tier 3 low-emission diesel engines without DPF and using SCR technology (AdBlue). Suitable for most supercharged and naturally aspirated diesel engines which run on high or low sulphur fuel: lorries, construction and agricultural equipment, stationary engines, generators, marine engines, etc. It is also suitable for gasoline engines in mixed fleets of vehicles where the manufacturer recommends the use of API SL or ACEA A3/B4, ACEA/B3 SAE 15W-40 oil.

Yacco Galaxie GT SAE 10W60 is a 100% synthetic PAO and ester based racing oil. 100% synthetic oil made from synthetic polyalphaolefins (PAO) and ester base oils of a high molecular weight, ensuring optimal lubrication under extreme service conditions. Recommended for highly stressed sports and grand touring engines used either on roads or circuits. Initially developed for gasoline engines, regardless of whether they are turbocharged or multi-valve, this oil is also suitable for diesel engines. It is also suitable for any engine where the manufacturer recommends or specifies the use of SAE 10W-60 oil which meets API SG, SH, SJ, SL, SM, SN, ACEA A3/B3 or A3/B4 specifications (Alfa Romeo, BMW, Ferrari, Lancia, Lotus, Maserati, etc.).

Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.

DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1

A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.

Viscosity: SAE 5W-40

Quality: ACEA C3, API SN

Heavy Duty Diesel Engine Oil

Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.

100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).

Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified.

Very low viscosity engine oil for highly supercharged diesel engines

DEUTZ DQC II-10 ACEA E7 API CI-4

Yacco VX 500 SAE 10W40 is a synthetic technology oil for high performance gasoline and diesel engines. High-performance synthetic technology lubricant recommended for gasoline, diesel and LPG engines fitted with turbo or direct injection systems. Suitable for vehicles used for long motorway journeys under severe driving conditions and short journeys with frequent stop-and-go.

Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)

Use Promo Code FLUID-CAT for Free shipping for more than 25 drums of 20L.

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

Yacco BVX 500 X SAE 75W80 is a synthetic high performance transmission oil. Multipurpose transmission oil suitable for all manual transmissions in light vehicles and certain types of commercial vans. Yacco BVX 500 X SAE 75W80 covers a wide range of uses and specifications. It is suitable for use in manual transmissions from a large number of car brands.

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

Yacco LUBE RN17 SAE 5W30 is a 100% synthetic “Mid SAPS” oil for gasoline and diesel engines. Specifically developed to meet the new Renault RN-17 5W-30 specification required by certain gasoline and diesel Renault engines manufactured from 2018 onwards. Backward compatible with older engines when the manufacturer is referring to RN0710 or RN0700 oils, except RS engines (Renault Sport). For RS and Alpine engines, use Renault RN17 RSA approved Yacco GALAXIE A SAE 0W40 lubricant . For diesel DPF engines up to Euro6d-temp series, use exclusively RN0720 oil (Yacco LUBE R 5W30). Can be used where SAE 5W-30 grade ACEA C3 oil is specified by the manufacturer.

VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.

Refer to the user manual.

Viscosity: SAE 15W-40

Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/

CI-4/ ECF-3 / ACEA E9 / E7

Old references: 23039848 / 23039851 / 23039853

Premium diesel engine oil for the latest generation of DEUTZ engines with exhaust gas aftertreatment.

DEUTZ DQC IV-10 LA - ACEA E9/E7/E6 - API CI-4 - JASO DH-2