3E-9901 Diesel Engine Oil DEO Caterpillar 15W40 (5L)

Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.

100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).

Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified.

Yacco BVX 500 X SAE 75W80 is a synthetic high performance transmission oil. Multipurpose transmission oil suitable for all manual transmissions in light vehicles and certain types of commercial vans. Yacco BVX 500 X SAE 75W80 covers a wide range of uses and specifications. It is suitable for use in manual transmissions from a large number of car brands.

Yacco Galaxie GT SAE 10W60 is a 100% synthetic PAO and ester based racing oil. 100% synthetic oil made from synthetic polyalphaolefins (PAO) and ester base oils of a high molecular weight, ensuring optimal lubrication under extreme service conditions. Recommended for highly stressed sports and grand touring engines used either on roads or circuits. Initially developed for gasoline engines, regardless of whether they are turbocharged or multi-valve, this oil is also suitable for diesel engines. It is also suitable for any engine where the manufacturer recommends or specifies the use of SAE 10W-60 oil which meets API SG, SH, SJ, SL, SM, SN, ACEA A3/B3 or A3/B4 specifications (Alfa Romeo, BMW, Ferrari, Lancia, Lotus, Maserati, etc.).

LUBE F SAE 5W30 is a 100% synthetic fuel economy engine oil. LUBE F SAE 5W30 is specifically developed to meet the Ford WSS-M2C913-D & ST JLR.03.5003 specifications. LUBE F SAE 5W30 is suitable for most FORD & Jaguar Land Rover diesel /gasoline engines.* LUBE F SAE 5W30 is also recommended when the manufacturer recommends these FORD/JLR specifications or the use of ACEA A5/B5, API SL/CF oil (Honda, Kia, Mazda, Volvo, etc.).

Product discontinued and replaced by VDS 4.5.

VDS-3 covers even more stringent requirements on the cleanliness of the pistons and the displacement glazing compared to the VDS-2,

ensuring the longevity and reliability of your engine.

The high quality of VDS-3 oil allows, in certain cases, to increase the intervals of the drains.

Viscosity: SAE 15W-40

Quality: VDS-3, API CI-4, ACEA E5

Old references: 22479638 / 22479642 / 22479643

Yacco Lube F SAE 0W30 is a 100% synthetic “MID SAPS” oil for diesel and gasoline engines. 100% synthetic high performance “fuel economy” oil for diesel and gasoline engines in passenger cars and light commercial vehicles. Specifically designed to meet the Ford WSS-M2C950-A and Jaguar Land Rover JLR.03.5007 specifications for diesel engines. Also suitable for diesel and gasoline engines that require the use of an ACEA C2 SAE 0W-30 oil. Compatible with Alfa Romeo, Fiat, Lancia, Honda, Iveco UV, Hyundai, Mitsubishi, Subaru, Suzuki, Toyota, etc.

Yacco GALAXIE SAE 15W50 is a 100% synthetic PAO & Ester based racing oil. Yacco GALAXIE SAE 15W50 is a 100% synthetic oil made from synthetic polyalphaolefins (PAO) and ester base oils of a high molecular weight, ensuring optimal lubrication under extreme service conditions. Recommended for highly stressed sports and grand touring engines used on roads or race tracks. Initially developed for gasoline engines, regardless of whether they are turbocharged or multi-valve, this oil is also suitable for diesel engines. Also suitable for any engine for which the manufacturer recommends the use of SAE 15W50 oil which meets API SG, SH, SJ, SL, SM, SN, ACEA A3/B3 or A3/B4 specifications.

Yacco Lube FR+ SAE 5W30 is a 100% Synthetic Fuel Economy « Mid SAPS » oil for gasoline and diesel engines. Yacco Lube FR+ SAE 5W30 is specifically developped to meet the PSA B71 2290 and Renault RN-17 5W-30 specifications. These stringent specifications apply to Peugeot, Citroën, DS and Renault, Dacia vehicles. They help to improve fuel efficiency and allow to reduce O2 emissions. This oil can be used in other gasoline and diesel engines where SAE 5W-30 grade ACEA C2 or C3, or API oils are specified by the manufacturer.

Yacco VX 300 SAE 15W50 is a semi synthetic oil for high performance gasoline and diesel engines. Suitable for all kinds of conventional and sophisticated gasoline and diesel engines (multi-valve, turbocharged, etc.). Particularly suitable for engines with significant running clearance or those suffering from excessive oil consumption . Compatible with LPG vehicles and/or those fitted with a catalytic converter.

Yacco TRANSPRO 40 SAE 15W40 is a mineral oil for diesel engines. Mineral oil developed to meet the strict technical requirements of Euro 5 & Euro 6 or Tier 4 & Tier 3 low-emission diesel engines without DPF and using SCR technology (AdBlue). Suitable for most supercharged and naturally aspirated diesel engines which run on high or low sulphur fuel: lorries, construction and agricultural equipment, stationary engines, generators, marine engines, etc. It is also suitable for gasoline engines in mixed fleets of vehicles where the manufacturer recommends the use of API SL or ACEA A3/B4, ACEA/B3 SAE 15W-40 oil.

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine with aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CJ-4, CI-4 PLUS/CI-4, API SM

- Viscosity SAE: 15W40

VDS 4.5 is a high-performance heavy-duty engine oil providing outstanding protection and fuel economy. VDS-4.5 delivers improved engine cleanliness and protection against piston deposits through the use of high-quality base oils and additive components. VDS-4.5 is available in two viscosities. VDS 4.5 15W40 and VDS-4.5 10W-30. VDS-4.5 10W-30 is recommended for some newer engines (e.g. Stage V engines) to further improve durability and fuel economy.

Always refer to the operators manual/service bulletin.

Viscosity: SAE 10W-30

Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/CI-4/ECF-3/ACEA E9/E7

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.

DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1

A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.

Viscosity: SAE 5W-40

Quality: ACEA C3, API SN

Yacco BVX LS 1000 SAE 75W140 is a 100% synthetic oil for gearboxes and axles. 100% synthetic long life oil for highly stressed gearboxes and drive axles. Particularly recommended for self-locking and limited slip differentials. Various uses: sports and racing cars, 4WD vehicles, construction, agricultural and industrial vehicles, etc.