Engine Oil VDS-4.5 15W40 Volvo Penta (20L)

Product discontinued and replaced by VDS 4.5.

VDS-3 covers even more stringent requirements on the cleanliness of the pistons and the displacement glazing compared to the VDS-2,

ensuring the longevity and reliability of your engine.

The high quality of VDS-3 oil allows, in certain cases, to increase the intervals of the drains.

Viscosity: SAE 15W-40

Quality: VDS-3, API CI-4, ACEA E5

Old references: 22479638 / 22479642 / 22479643

Yacco VX 500 SAE 10W40 is a synthetic technology oil for high performance gasoline and diesel engines. High-performance synthetic technology lubricant recommended for gasoline, diesel and LPG engines fitted with turbo or direct injection systems. Suitable for vehicles used for long motorway journeys under severe driving conditions and short journeys with frequent stop-and-go.

A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.

Viscosity: SAE 5W-40

Quality: ACEA C3, API SN

Yacco Lube W SAE 0W30 is a 100% synthetic “MID SAPS” oil for diesel and gasoline engines.

Yacco Lube W SAE 0W30 is a 100 % synthetic oil with “Mid SAPS” technology for diesel engines (with or without DPF ) and gasoline engines (with or without turbocharger), designed for recent vehicles (from Euro 4).

Yacco Lube W SAE 0W30 specifically recommended for Volkswagen Group vehicles manufactured after 2000 (except R5/V10 engines). Also compatible with many other OEM engines which require a SAE 0W 30 ACEA C3 lubricant (Subaru, Suzuki, Mitsubishi, Mazda, Honda…).

Yacco BVX LS 200 SAE 80W90 is a high-quality mineral oil for limited-slip differentials.

Specifically designed for 4WD vehicles. Lubrication of limited-slip differentials in sports and racing cars, lorries, construction equipment and agricultural equipment, where SAE 80W90 LS grade oil is recommended by the OEM. Especially developed for limited-slip differentials in 4WD vehicles.

It may be used in conventional differentials where API GL-5 extreme-pressure, SAE 80W90, SAE 85W90 or SAE 90 oil is recommended.

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine with aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CJ-4, CI-4 PLUS/CI-4, API SM

- Viscosity SAE: 15W40

Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.

100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).

Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified.

Yacco Lube P SAE 0W30 is a 100% synthetic “Mid SAPS” oil for diesel and gasoline engines. 100% synthetic high performance fuel economy oil for diesel and gasoline engines in passenger cars and light commercial vehicles. Specifically designed for the most recent PSA GROUP (Peugeot/Citroën/DS) engines which require PSA B71 2312 oil: BlueHDi, hybrid engines, engines equipped with a Stop & Start system, etc. This ACEA C2 oil is also suitable for diesel and gasoline engines from other car manufacturers which require the use of ACEA C2 SAE 0W-30 oil: FIAT Group (Alfa Romeo, Fiat, Jeep, Lancia), Honda, Hyundai, Kia, Lexus, Mitsubishi, Subaru, Suzuki, Toyota, etc.

Heavy Duty Diesel Engine Oil

Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.

DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1

Yacco Galaxie GT SAE 10W60 is a 100% synthetic PAO and ester based racing oil. 100% synthetic oil made from synthetic polyalphaolefins (PAO) and ester base oils of a high molecular weight, ensuring optimal lubrication under extreme service conditions. Recommended for highly stressed sports and grand touring engines used either on roads or circuits. Initially developed for gasoline engines, regardless of whether they are turbocharged or multi-valve, this oil is also suitable for diesel engines. It is also suitable for any engine where the manufacturer recommends or specifies the use of SAE 10W-60 oil which meets API SG, SH, SJ, SL, SM, SN, ACEA A3/B3 or A3/B4 specifications (Alfa Romeo, BMW, Ferrari, Lancia, Lotus, Maserati, etc.).

Yacco TRANSPRO 40 SAE 15W40 is a mineral oil for diesel engines. Mineral oil developed to meet the strict technical requirements of Euro 5 & Euro 6 or Tier 4 & Tier 3 low-emission diesel engines without DPF and using SCR technology (AdBlue). Suitable for most supercharged and naturally aspirated diesel engines which run on high or low sulphur fuel: lorries, construction and agricultural equipment, stationary engines, generators, marine engines, etc. It is also suitable for gasoline engines in mixed fleets of vehicles where the manufacturer recommends the use of API SL or ACEA A3/B4, ACEA/B3 SAE 15W-40 oil.

Yacco VX 300 SAE 15W50 is a semi synthetic oil for high performance gasoline and diesel engines. Suitable for all kinds of conventional and sophisticated gasoline and diesel engines (multi-valve, turbocharged, etc.). Particularly suitable for engines with significant running clearance or those suffering from excessive oil consumption . Compatible with LPG vehicles and/or those fitted with a catalytic converter.