Français
Availability: 19 In Stock
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4 Reliable and high-quality 81296515 for best results.
There are 7 products.
Availability: 20 In Stock
Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.
DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1 Reliable and high-quality 81296518 for best results.
Availability: 26 In Stock
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853 Reliable and high-quality 23909460 for best results.
Availability: 12 In Stock
Yacco TRANSPRO 40 SAE 15W40 is a mineral oil for diesel engines. Mineral oil developed to meet the strict technical requirements of Euro 5 & Euro 6 or Tier 4 & Tier 3 low-emission diesel engines without DPF and using SCR technology (AdBlue). Suitable for most supercharged and naturally aspirated diesel engines which run on high or low sulphur fuel: lorries, construction and agricultural equipment, stationary engines, generators, marine engines, etc. It is also suitable for gasoline engines in mixed fleets of vehicles where the manufacturer recommends the use of API SL or ACEA A3/B4, ACEA/B3 SAE 15W-40 oil. Reliable and high-quality 335L15W40 for best results.
Availability: Out of stock
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN Reliable and high-quality 23211288 for best results.
Availability: Out of stock
Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.
100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).
Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified. Reliable and high-quality 335L5W40FAP for best results.
Availability: Out of stock
Yacco VX 500 SAE 10W40 is a synthetic technology oil for high performance gasoline and diesel engines. High-performance synthetic technology lubricant recommended for gasoline, diesel and LPG engines fitted with turbo or direct injection systems. Suitable for vehicles used for long motorway journeys under severe driving conditions and short journeys with frequent stop-and-go. Reliable and high-quality 335L10W40 for best results.
