Cart
0
Whishlist

Active filters

  • Volume: 1 L
  • Volume: 208 L

Yacco Oil ATF XFE (1L)

€13.85 €12.46 -10%
Availability: 10 In Stock

Yacco ATF X FE is a fuel economy synthetic fluid for automatic transmissions.

100% synthetic fluid for automatic transmissions and power steering systems in passenger cars and light commercial vehicles. Particularly recommended for multi-speed automatic gearboxes (up to 8 and 9 speed transmissions) requiring a low viscosity ATF for better fuel economy and lower CO2 emissions.

Specifications

Yacco ATF X FE meets the specifications of the main OEMs and covers a wide range of uses (see table of specifications).

Yacco Oil ATF X (1L)

€13.85 €12.46 -10%
Availability: 10 In Stock

Yacco ATF X is a synthetic fluid for automatic transmissions.

Lubricating fluid for automatic transmissions, power steering and hydraulic systems of many types of vehicles, such as passenger cars, light commercial vehicles, lorries, buses, construction equipment, agricultural equipment, boats, etc.

Specifications

Yacco ATF X meets the main OEM’s specifications and has a wide range of uses (see table of specifications).

Yacco ATF X can replace 3 types of our ATF fluids: YACCO ATF III, YACCO ATF D and YACCO ATF A while also adapted for many other applications.

For DCT (DSG) transmissions, refer to YACCO ATF DCT. For CVT transmissions, refer to YACCO ATF CVT.

Availability: Out of stock

High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance.

Availability: Out of stock

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

Availability: Out of stock

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat Extended Life Coolant is recommended in most Cat engines. Do Not Add Water to dilute.

• Factory-Fill - Used as standard factory-fill for all Cat engines cooling systems.

• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as 500% compared to conventional coolants. CAT ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal requirements.

• Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection

Availability: Out of stock

The powerful additive to increase resistance to cold. DEUTZ FlowBoost reduces the minimum fuel operating temperature by up to 10°C and thus enables extended use of summer and transitional diesel. Additional special agents prevent the formation of large paraffin crystals and thus filters and fuel lines are protected against possible clogging.

Availability: Out of stock

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine with aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CJ-4, CI-4 PLUS/CI-4, API SM

- Viscosity SAE: 15W40

Availability: Out of stock

For power steering, Power Trim leveling system and inverters HS. Protects against wear, even at high temperatures. Offer also very good corrosion protection. Remark ! Should never be used when API GL-5 oil is recommended. ATF oil, type Dexron III.

Old references: 85122800 / 1161995

Availability: Out of stock

Diesel additive specially designed for critical applications with low fuel flow such as emergency generators or auxiliary generators. DEUTZ Start Boost increases diesel storage capacity and protects the fuel system against microorganisms. Ignition and starting reliability, even after prolonged shutdown, are increased thanks to a better cetane number.