Description:
Cat® Cooling System Cleaner - Quick Flush is for use as preventative maintenance or as a short-time flush at the time of coolant change.

Attributes:
Removes lime deposits, scale and solder bloom. Allows for one-step cleaning in just 90 minutes.

Recommended Application:
Not for use in removing large amounts of oil from cooling systems.

From € 181 070 (excl. VAT)

Rating E - 1342 bkW - 1825 mhp - 2300 rpm / Yacht setting.

C32 ACERT propulsion engine ratings of 1925 mhp (1900 bhp) 1417 bkW, 1825 mhp (1800 bhp) 1342 bkW, and 1622 mhp (1600 bhp) 1193 bkW are available with heat exchanger cooling. These ratings are compliant for U.S. EPA Tier 3 Recreational, EU Stage IIIA, and IMO II. The 1600 and 1800 bhp ratings are also meet US EPA Tier 3 Commercial Standards. The engine configuration includes an air cleaner and CCV system as well as jacket water aftercooling. Additional features include a “plug-in PTO”, an MECP I control panel, and hybrid fuel lines. 

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 214-7567 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 214-7567 are detailed below.

Cat® Belt 7E-0744 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Longueur de la courroie (in) / Belt Length (in): 34.49 Type de courroie / Belt Type: V-Belts - Cogged Largeur de la courroie (in) / Belt Width (in): 0.50

CAT® Engine Oil Filters 249-2347 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: C18, and see below for other compatibilities.

Available in two colors, white or yellow.

Cat® O-Rings are used in static sealing and some dynamic applications.

Cat® O-Ring 3E-6773 is made from materials that are matched to the fluids, temperatures and pressures found in Cat engines and machines. The materials resist wear and extrusion, and provide superior resistance to seal compression set. In addition, certain Cat O-Rings are coated with PTFE to minimize seal twisting and cutting during seal installation, all the characteristics and compatibilities of the Cat® O-Ring 3E-6773 are detailed below.

CAT® Fuel Filters 1R-0755 / 389-0433 is designed to remove the small contaminants that cause the most harm to your Caterpillar Engines. Designed to work specifically with the following Caterpillar engines models: 3508B, and see below for other compatibilities.

The filter is available in two colors: White (ref. 389-0433) to match with your white engine room or Yellow (ref. 1R-0755) to comply with Caterpillar Yellow color.

Benefits:

• - Unique filter media providing unsurpassed protection
• - Acrylic beads preventing bunching
• - Spiral roving providing greater pleat stability and maximum dirt holding capability
• - Nylon center tube preventing metal contamination
• - Molded end caps preventing leaks

CAT® Engine Oil Filters 7W-2326 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: 3054, C4.4, and see below for other compatibilities.

Crankshaft Seal 3S-9643 retain engine oil and prevent external contamination from entering the engine oil system.

Seals designed for dry applications (air-to-fluid interface) typically include a primary lip that prevents engine oil from leaking, and a dust lip. In wet applications (fluid-to-fluid interface), the dust lip is replaced by an auxiliary lip capable of pumping external fluid away from the engine. Some seals have a plastic sleeve to aid in the installation process.

• Bore Diameter (mm): 67
• Primary Sealing Material: Plastic
• Shaft Diameter (mm): 58

Cat® Belt 8L-8984 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Longueur de la courroie (in) / Belt Length (in): 50 Type de courroie / Belt Type: V-Belts - Cogged Largeur de la courroie (in) / Belt Width (in): 0.50

CAT® Fuel Filters 1R-1725 is designed to remove the small contaminants that cause the most harm to your Caterpillar Engines. Designed to work specifically with the following Caterpillar engines models: see compatibility below.

Benefits:

• - Unique filter media providing unsurpassed protection
• - Acrylic beads preventing bunching
• - Spiral roving providing greater pleat stability and maximum dirt holding capability
• - Nylon center tube preventing metal contamination
• - Molded end caps preventing leaks

To be used with sticker 115-7580

Replacement part for 061-8561

CAT® Engine Oil Filters 1R-0714 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: 3116, 3208 and see below for other compatibilities.

Cat® Belt 1S-1193 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Longueur de la courroie (in) / Belt Length (in): 49.49 Type de courroie / Belt Type: V-Belts - Cogged Largeur de la courroie (in) / Belt Width (in): 0.50

Price per centimeters, include the appropriate quantity for total lenght in centimeters

Cat® Belt 9Y-1131 is manufactured and tested for ideal traction, speed and long service life on Cat machines to prevent slippage and alignment problems. Below, please find its attributes: Longueur de la courroie (in) / Belt Length (in): 46.50 Type de courroie / Belt Type: V-Belts - Cogged Largeur de la courroie (in) / Belt Width (in): 0.50

Replacement zinc anode 116-7011 is used to protect metallic components from galvanic corrosion. This zinc is designed to work specifically with the following Caterpillar engines models: 3508B, 3512C, and see below for other compatibilities.

Attributes: Cat® parts are manufactured to precise specifications and are built for durability, reliability, productivity, less environmental impact, and reuse.