Français
Availability: 6 In Stock
Premium ATF-1L for optimal performance and reliability.
There are 20 products.
Availability: 5 In Stock
Yacco ATF X is a synthetic fluid for automatic transmissions.
Lubricating fluid for automatic transmissions, power steering and hydraulic systems of many types of vehicles, such as passenger cars, light commercial vehicles, lorries, buses, construction equipment, agricultural equipment, boats, etc.
Specifications
Yacco ATF X meets the main OEM’s specifications and has a wide range of uses (see table of specifications).
Yacco ATF X can replace 3 types of our ATF fluids: YACCO ATF III, YACCO ATF D and YACCO ATF A while also adapted for many other applications.
For DCT (DSG) transmissions, refer to YACCO ATF DCT. For CVT transmissions, refer to YACCO ATF CVT. Reliable and high-quality 331LATFDX for best results.
Availability: 9 In Stock
Yacco ATF X FE is a fuel economy synthetic fluid for automatic transmissions.
100% synthetic fluid for automatic transmissions and power steering systems in passenger cars and light commercial vehicles. Particularly recommended for multi-speed automatic gearboxes (up to 8 and 9 speed transmissions) requiring a low viscosity ATF for better fuel economy and lower CO2 emissions.
Specifications
Yacco ATF X FE meets the specifications of the main OEMs and covers a wide range of uses (see table of specifications). Reliable and high-quality 331LATFXFE for best results.
Availability: 17 In Stock
Yacco BVX 500 X SAE 75W80 is a synthetic high performance transmission oil. Multipurpose transmission oil suitable for all manual transmissions in light vehicles and certain types of commercial vans. Yacco BVX 500 X SAE 75W80 covers a wide range of uses and specifications. It is suitable for use in manual transmissions from a large number of car brands. Reliable and high-quality 332LEP75W80 for best results.
Availability: 9 In Stock
Yacco BVX 600 SAE 75W90 is a synthetic high performance oil for manual transmissions.
Suitable for all manual transmissions (gearboxes, drive axles and differential gears) in passenger cars and light commercial vehicles where SAE 75W90 or SAE 80W90 oil is recommended by the manufacturer. Particularly recommended for the gearboxes and drive axles of modern vehicles with gear shifting issues during start up and highly stressed transmission units. Reliable and high-quality 332L75W90 for best results.
Availability: 5 In Stock
Yacco BVX LS 1000 SAE 75W140 is a 100% synthetic oil for gearboxes and axles. 100% synthetic long life oil for highly stressed gearboxes and drive axles. Particularly recommended for self-locking and limited slip differentials. Various uses: sports and racing cars, 4WD vehicles, construction, agricultural and industrial vehicles, etc. Reliable and high-quality 332L75W140 for best results.
Availability: 2 In Stock
Yacco GALAXIE SAE 15W50 is a 100% synthetic PAO & Ester based racing oil. Yacco GALAXIE SAE 15W50 is a 100% synthetic oil made from synthetic polyalphaolefins (PAO) and ester base oils of a high molecular weight, ensuring optimal lubrication under extreme service conditions. Recommended for highly stressed sports and grand touring engines used on roads or race tracks. Initially developed for gasoline engines, regardless of whether they are turbocharged or multi-valve, this oil is also suitable for diesel engines. Also suitable for any engine for which the manufacturer recommends the use of SAE 15W50 oil which meets API SG, SH, SJ, SL, SM, SN, ACEA A3/B3 or A3/B4 specifications. Reliable and high-quality 332L15W50G for best results.
Availability: 13 In Stock
Yacco Galaxie GT SAE 10W60 is a 100% synthetic PAO and ester based racing oil. 100% synthetic oil made from synthetic polyalphaolefins (PAO) and ester base oils of a high molecular weight, ensuring optimal lubrication under extreme service conditions. Recommended for highly stressed sports and grand touring engines used either on roads or circuits. Initially developed for gasoline engines, regardless of whether they are turbocharged or multi-valve, this oil is also suitable for diesel engines. It is also suitable for any engine where the manufacturer recommends or specifies the use of SAE 10W-60 oil which meets API SG, SH, SJ, SL, SM, SN, ACEA A3/B3 or A3/B4 specifications (Alfa Romeo, BMW, Ferrari, Lancia, Lotus, Maserati, etc.). Reliable and high-quality 332L10W60 for best results.
Availability: Out of stock
The double-acting DEUTZ Clean-Diesel InSyPro® premium fuel additive works in two different steps:
- "Clean-Up" cleaning effect
- "Keep Clean" fuel stabilization
(Replace 01017967) Reliable and high-quality 01016710 / 01017967 for best results.
Availability: Out of stock
The powerful additive to increase resistance to cold. DEUTZ FlowBoost reduces the minimum fuel operating temperature by up to 10°C and thus enables extended use of summer and transitional diesel. Additional special agents prevent the formation of large paraffin crystals and thus filters and fuel lines are protected against possible clogging. Reliable and high-quality 1091260 for best results.
Availability: Out of stock
Diesel additive specially designed for critical applications with low fuel flow such as emergency generators or auxiliary generators. DEUTZ Start Boost increases diesel storage capacity and protects the fuel system against microorganisms. Ignition and starting reliability, even after prolonged shutdown, are increased thanks to a better cetane number. Reliable and high-quality 1091262 for best results.
Availability: Out of stock
High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance. Reliable and high-quality 22479650 for best results.
Availability: Out of stock
For hydraulic steering. Protects against wear at both low and high temperatures. Also offers ideal protection against corrosion. Particularly suitable for marine use. Does not stress sealant.
Viscosity: ISO VG 15 Reliable and high-quality 22618337 for best results.
Availability: Out of stock
For power steering, Power Trim leveling system and inverters HS. Protects against wear, even at high temperatures. Offer also very good corrosion protection. Remark ! Should never be used when API GL-5 oil is recommended. ATF oil, type Dexron III.
Old references: 85122800 / 1161995 Reliable and high-quality 23909464 for best results.
Availability: Out of stock
Premium SAE30-1L for optimal performance and reliability.
Availability: Out of stock
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN Reliable and high-quality 23211287 for best results.
Availability: Out of stock
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853 Reliable and high-quality 23909459 for best results.
Availability: Out of stock
Yacco BVX LS 200 SAE 80W90 is a high-quality mineral oil for limited-slip differentials. Specifically designed for 4WD vehicles. Lubrication of limited-slip differentials in sports and racing cars, lorries, construction equipment and agricultural equipment, where SAE 80W90 LS grade oil is recommended by the OEM. Especially developed for limited-slip differentials in 4WD vehicles. It may be used in conventional differentials where API GL-5 extreme-pressure, SAE 80W90, SAE 85W90 or SAE 90 oil is recommended. Reliable and high-quality 332LEP80W90GL for best results.
Availability: Out of stock
Yacco Lube F SAE 0W30 is a 100% synthetic “MID SAPS” oil for diesel and gasoline engines.
100% synthetic high performance “fuel economy” oil for diesel and gasoline engines in passenger cars and light commercial vehicles. Specifically designed to meet the Ford WSS-M2C950-A and Jaguar Land Rover JLR.03.5007 specifications for diesel engines. Also suitable for diesel and gasoline engines that require the use of an ACEA C2 SAE 0W-30 oil. Compatible with Alfa Romeo, Fiat, Lancia, Honda, Iveco UV, Hyundai, Mitsubishi, Subaru, Suzuki, Toyota, etc. Reliable and high-quality 332LF0W30 for best results.
Availability: Out of stock
Yacco VX 300 SAE 15W50 is a semi synthetic oil for high performance gasoline and diesel engines. Suitable for all kinds of conventional and sophisticated gasoline and diesel engines (multi-valve, turbocharged, etc.). Particularly suitable for engines with significant running clearance or those suffering from excessive oil consumption . Compatible with LPG vehicles and/or those fitted with a catalytic converter. Reliable and high-quality 332L15W50 for best results.