Fluids

Yacco Lube P SAE 0W30 is a 100% synthetic “Mid SAPS” oil for diesel and gasoline engines. 100% synthetic high performance fuel economy oil for diesel and gasoline engines in passenger cars and light commercial vehicles. Specifically designed for the most recent PSA GROUP (Peugeot/Citroën/DS) engines which require PSA B71 2312 oil: BlueHDi, hybrid engines, engines equipped with a Stop & Start system, etc. This ACEA C2 oil is also suitable for diesel and gasoline engines from other car manufacturers which require the use of ACEA C2 SAE 0W-30 oil: FIAT Group (Alfa Romeo, Fiat, Jeep, Lancia), Honda, Hyundai, Kia, Lexus, Mitsubishi, Subaru, Suzuki, Toyota, etc.

Yacco VX 500 SAE 10W40 is a synthetic technology oil for high performance gasoline and diesel engines. High-performance synthetic technology lubricant recommended for gasoline, diesel and LPG engines fitted with turbo or direct injection systems. Suitable for vehicles used for long motorway journeys under severe driving conditions and short journeys with frequent stop-and-go.

Yacco Lube R SAE 5W30 is a 100% synthetic “Low SAPS” oil for diesel engines. Specifically developed for Renault diesel engines with particulate filters (which require a RN0720 oil), as well as for Mercedes-Benz engines that require the use of a MB-Approval 226.51 oil. Suitable for the latest diesel engines fitted with particulate filters in passenger cars and light commercial vehicles. Can be used where a SAE 5W30 grade ACEA C4 oil is specified by the manufacturer: Fiat (Talento), Infiniti, Mitsubishi, Nissan, Samsung (QM3), Suzuki (Grand Vitara ), etc.

Yacco SUPER TRANSHYD 400 HV46 is a high viscosity index, anti-wear hydraulic oil.

Specifically designed for lubricating hydraulic systems used under severe service conditions. Available in several viscosities to meet OEM requirements and service conditions. Particularly recommended for construction equipment^* used outdoors, all year round.

Also suitable for forklifts, industrial equipment and with hydrostatic drive.

Yacco BVX 600 SAE 75W90 is a synthetic high performance oil for manual transmissions.

Suitable for all manual transmissions (gearboxes, drive axles and differential gears) in passenger cars and light commercial vehicles where SAE 75W90 or SAE 80W90 oil is recommended by the manufacturer. Particularly recommended for the gearboxes and drive axles of modern vehicles with gear shifting issues during start up and highly stressed transmission units.

Yacco Lube W SAE 0W30 is a 100% synthetic “MID SAPS” oil for diesel and gasoline engines.

Yacco Lube W SAE 0W30 is a 100 % synthetic oil with “Mid SAPS” technology for diesel engines (with or without DPF ) and gasoline engines (with or without turbocharger), designed for recent vehicles (from Euro 4).

Yacco Lube W SAE 0W30 specifically recommended for Volkswagen Group vehicles manufactured after 2000 (except R5/V10 engines). Also compatible with many other OEM engines which require a SAE 0W 30 ACEA C3 lubricant (Subaru, Suzuki, Mitsubishi, Mazda, Honda…).

Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.

100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).

Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified.

High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance.

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

High performance fully synthetic transmission oils, specially designed to ensure excellent load capacity on a wide operating temperature range. Ensure performance optimum reversing control and maximum protection against wear and corrosion. They contain high marine additives totally exclusive tech to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help ensure proper operation of the drive unit while maintaining its long-term performance.

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

High performance fully synthetic transmission oils, specially designed to ensure excellent load capacity on a wide operating temperature range. Ensure performance optimum reversing control and maximum protection against wear and corrosion. They contain high marine additives totally exclusive tech to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help ensure proper operation of the drive unit while maintaining its long-term performance.

CAT® Engine Oil Filters 5L-2952 is designed to meet the needs of Caterpillar engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.

Designed to work specifically with the following Caterpillar engines models: see compatibility below.

Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)

Use Promo Code FLUID-CAT for Free shipping for more than 25 drums of 20L.

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

Specially tested for Volvo Penta compressors. Fully synthetic oil that withstands both low and high temperatures. Protects the compressor from corrosion.

Viscosity: ISO VG 68

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat Extended Life Coolant is recommended in most Cat engines. Do Not Add Water to dilute.

• Factory-Fill - Used as standard factory-fill for all Cat engines cooling systems.

• Lower Maintenance Costs - Reduces engine coolant and additive costs by as much as 500% compared to conventional coolants. CAT ELC eliminates the need for supplemental coolant additives, extends coolant change-out intervals and reduces disposal requirements.

• Advanced Metal Protection - Incorporates an advanced formula technology with organic acid additive corrosion inhibitors, such as a combination of mono and dicarboxylates for maximum protection

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine with aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CJ-4, CI-4 PLUS/CI-4, API SM

- Viscosity SAE: 15W40

For hydraulic steering. Protects against wear at both low and high temperatures. Also offers ideal protection against corrosion. Particularly suitable for marine use. Does not stress sealant.

Viscosity: ISO VG 15

Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine with aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CJ-4, CI-4 PLUS/CI-4, API SM

- Viscosity SAE: 15W40

For power steering, Power Trim leveling system and inverters HS. Protects against wear, even at high temperatures. Offer also very good corrosion protection. Remark ! Should never be used when API GL-5 oil is recommended. ATF oil, type Dexron III.

Old references: 85122800 / 1161995

For power steering, Power Trim leveling system and inverters HS. Protects against wear, even at high temperatures. Offer also very good corrosion protection. Remark ! Should never be used when API GL-5 oil is recommended. ATF oil, type Dexron III.

Old references: 85122800 / 1161995

High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance.

High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance.