Active filters

  • Volume: 5 L
  • SAE: 15W40
  • SAE: 80W90
Availability: 140 In Stock

Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)

Use Promo Code FLUID-CAT for Free shipping for more than 25 drums of 20L.

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40

Engine Oil VDS-4.5 15W40 Volvo Penta (5L)

€82.69 €78.56 -5%
Availability: 28 In Stock

VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.

Refer to the user manual.

Viscosity: SAE 15W-40

Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/

CI-4/ ECF-3 / ACEA E9 / E7

Old references: 23039848 / 23039851 / 23039853

Yacco Oil TRANSPRO 40 15W40 (5L)

€34.04 €30.64 -10%
Availability: 12 In Stock

Yacco TRANSPRO 40 SAE 15W40 is a mineral oil for diesel engines. Mineral oil developed to meet the strict technical requirements of Euro 5 & Euro 6 or Tier 4 & Tier 3 low-emission diesel engines without DPF and using SCR technology (AdBlue). Suitable for most supercharged and naturally aspirated diesel engines which run on high or low sulphur fuel: lorries, construction and agricultural equipment, stationary engines, generators, marine engines, etc. It is also suitable for gasoline engines in mixed fleets of vehicles where the manufacturer recommends the use of API SL or ACEA A3/B4, ACEA/B3 SAE 15W-40 oil.

Availability: Out of stock

High performance fully synthetic transmission oils, specially designed to ensure excellent load capacity on a wide operating temperature range. Ensure performance optimum reversing control and maximum protection against wear and corrosion. They contain high marine additives totally exclusive tech to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help ensure proper operation of the drive unit while maintaining its long-term performance.

Availability: Out of stock

Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)

Use Promo Code FLUID-CAT for Free shipping for more than 25 drums of 20L.

Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines

- Usage: Engine without aftertreatment systems

- Drainage interval: up to 500h

- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7

- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD

- Viscosity SAE: 15W40