0
Marine & Industrial Engines Parts & Service in South of France.
Yacco Lube P SAE 0W30 is a 100% synthetic “Mid SAPS” oil for diesel and gasoline engines. 100% synthetic high performance fuel economy oil for diesel and gasoline engines in passenger cars and light commercial vehicles. Specifically designed for the most recent PSA GROUP (Peugeot/Citroën/DS) engines which require PSA B71 2312 oil: BlueHDi, hybrid engines, engines equipped with a Stop & Start system, etc. This ACEA C2 oil is also suitable for diesel and gasoline engines from other car manufacturers which require the use of ACEA C2 SAE 0W-30 oil: FIAT Group (Alfa Romeo, Fiat, Jeep, Lancia), Honda, Hyundai, Kia, Lexus, Mitsubishi, Subaru, Suzuki, Toyota, etc.
Customer Service
Need help? Don't hesitate to contact us if you need further help selecting products.
Worldwide Shipping
If you wish to deliver to a country outside of our transportation list, please contact us.
Properties and advantages 100% synthetic ACEA C2 SAE 0W30 formula with PSA approval. Allows for significant fuel economy, thus reducing CO2 and exhaust gas emissions. “MID SAPS” technology (lower levels of sulphated ash, phosphorous and sulphur), prolonging the service life of particulate filters and increasing the protection of catalytic converters. Enhanced protection against wear and the formation of deposits. Low viscosity at cold temperatures for easy start-ups, whatever the outside temperature may be. Allows for safe extended oil change intervals.
Data sheet
Specific References
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.
DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853
Yacco LUBE P SAE 0W20 is a 100% synthetic “Mid SAPS” oil for diesel and gasoline engines. 100% synthetic high performance fuel economy oil for diesel and gasoline engines in passenger cars and light commercial vehicles. Specifically designed for the most recent PSA GROUP (Peugeot/Citroën/DS) engines which require PSA B71 2010 oil: BlueHDi, Pure Tech, hybrid engines, engines equipped with a Stop & Start system, etc. This ACEA C5 oil is also suitable for diesel and gasoline engines from other car manufacturers which require the use of ACEA C5 SAE 0W20 oil.
Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).
Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines
- Usage: Engine with aftertreatment systems
- Drainage interval: up to 500h
- Meet requirements of: API CJ-4, CI-4 PLUS/CI-4, API SM
- Viscosity SAE: 15W40
Yacco LUBE RN17 SAE 5W30 is a 100% synthetic “Mid SAPS” oil for gasoline and diesel engines. Specifically developed to meet the new Renault RN-17 5W-30 specification required by certain gasoline and diesel Renault engines manufactured from 2018 onwards. Backward compatible with older engines when the manufacturer is referring to RN0710 or RN0700 oils, except RS engines (Renault Sport). For RS and Alpine engines, use Renault RN17 RSA approved Yacco GALAXIE A SAE 0W40 lubricant . For diesel DPF engines up to Euro6d-temp series, use exclusively RN0720 oil (Yacco LUBE R 5W30). Can be used where SAE 5W-30 grade ACEA C3 oil is specified by the manufacturer.
Yacco SUPER TRANSHYD 400 HV46 is a high viscosity index, anti-wear hydraulic oil.
Specifically designed for lubricating hydraulic systems used under severe service conditions. Available in several viscosities to meet OEM requirements and service conditions. Particularly recommended for construction equipment* used outdoors, all year round.
Also suitable for forklifts, industrial equipment and with hydrostatic drive.
Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.
100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).
Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified.
Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)
Use Promo Code FLUID-CAT for Free shipping for more than 25 drums of 20L.
Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines
- Usage: Engine without aftertreatment systems
- Drainage interval: up to 500h
- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7
- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD
- Viscosity SAE: 15W40
LUBE F SAE 5W30 is a 100% synthetic fuel economy engine oil. LUBE F SAE 5W30 is specifically developed to meet the Ford WSS-M2C913-D & ST JLR.03.5003 specifications. LUBE F SAE 5W30 is suitable for most FORD & Jaguar Land Rover diesel /gasoline engines.* LUBE F SAE 5W30 is also recommended when the manufacturer recommends these FORD/JLR specifications or the use of ACEA A5/B5, API SL/CF oil (Honda, Kia, Mazda, Volvo, etc.).
Yacco Lube F SAE 0W30 is a 100% synthetic “MID SAPS” oil for diesel and gasoline engines. 100% synthetic high performance “fuel economy” oil for diesel and gasoline engines in passenger cars and light commercial vehicles. Specifically designed to meet the Ford WSS-M2C950-A and Jaguar Land Rover JLR.03.5007 specifications for diesel engines. Also suitable for diesel and gasoline engines that require the use of an ACEA C2 SAE 0W-30 oil. Compatible with Alfa Romeo, Fiat, Lancia, Honda, Iveco UV, Hyundai, Mitsubishi, Subaru, Suzuki, Toyota, etc.
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN
Free delivery in France (Metropolitan Area) from 500L of order, i.e. 25 drums of 20L with the promo code FLUID-CAT (to be added to the basket page).
Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines
- Usage: Engine without aftertreatment systems
- Drainage interval: up to 500h
- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7
- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD
- Viscosity SAE: 15W40
Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)
Use Promo Code FLUID-CAT for Free shipping for more than 25 drums of 20L.
Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines
- Usage: Engine without aftertreatment systems
- Drainage interval: up to 500h
- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7
- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD
- Viscosity SAE: 15W40
Français
