Marine & Industrial Engines Parts & Service in South of France.
LUBE F SAE 5W30 is a 100% synthetic fuel economy engine oil. LUBE F SAE 5W30 is specifically developed to meet the Ford WSS-M2C913-D & ST JLR.03.5003 specifications. LUBE F SAE 5W30 is suitable for most FORD & Jaguar Land Rover diesel /gasoline engines.* LUBE F SAE 5W30 is also recommended when the manufacturer recommends these FORD/JLR specifications or the use of ACEA A5/B5, API SL/CF oil (Honda, Kia, Mazda, Volvo, etc.).
Customer Service
Need help? Don't hesitate to contact us if you need further help selecting products.
Worldwide Shipping
If you wish to deliver to a country outside of our transportation list, please contact us.
Significant reduction in fuel consumption, thus lowering CO2 and exhaust emissions, for a more environmentally-friendly oil. Outstanding protection against wear, especially for the parts of the engine’s distribution. Fully compatible with the former specifications WSS-M2C913 C/913B/913-A. Good resistance to shearing and high temperatures. Excellent oil flow at low temperatures (tested at -35°C). Very good anti-oxidation properties maintain optimal viscosity over the service life of the oil, including in engines running on biodiesel.
Data sheet
Specific References
Free delivery in France (Metropolitan Area) from 500L of order, i.e. 3 drums of 208L with the promo code FLUID208-CAT (to be added to the basket page).
Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines
- Usage: Engine with aftertreatment systems
- Drainage interval: up to 500h
- Meet requirements of: API CJ-4, CI-4 PLUS/CI-4, API SM
- Viscosity SAE: 15W40
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
Yacco Galaxie GT SAE 10W60 is a 100% synthetic PAO and ester based racing oil. 100% synthetic oil made from synthetic polyalphaolefins (PAO) and ester base oils of a high molecular weight, ensuring optimal lubrication under extreme service conditions. Recommended for highly stressed sports and grand touring engines used either on roads or circuits. Initially developed for gasoline engines, regardless of whether they are turbocharged or multi-valve, this oil is also suitable for diesel engines. It is also suitable for any engine where the manufacturer recommends or specifies the use of SAE 10W-60 oil which meets API SG, SH, SJ, SL, SM, SN, ACEA A3/B3 or A3/B4 specifications (Alfa Romeo, BMW, Ferrari, Lancia, Lotus, Maserati, etc.).
Yacco Lube W SAE 0W30 is a 100% synthetic “MID SAPS” oil for diesel and gasoline engines.
Yacco Lube W SAE 0W30 is a 100 % synthetic oil with “Mid SAPS” technology for diesel engines (with or without DPF ) and gasoline engines (with or without turbocharger), designed for recent vehicles (from Euro 4).
Yacco Lube W SAE 0W30 specifically recommended for Volkswagen Group vehicles manufactured after 2000 (except R5/V10 engines). Also compatible with many other OEM engines which require a SAE 0W 30 ACEA C3 lubricant (Subaru, Suzuki, Mitsubishi, Mazda, Honda…).
Yacco BVX LS 200 SAE 80W90 is a high-quality mineral oil for limited-slip differentials.
Specifically designed for 4WD vehicles. Lubrication of limited-slip differentials in sports and racing cars, lorries, construction equipment and agricultural equipment, where SAE 80W90 LS grade oil is recommended by the OEM. Especially developed for limited-slip differentials in 4WD vehicles.
It may be used in conventional differentials where API GL-5 extreme-pressure, SAE 80W90, SAE 85W90 or SAE 90 oil is recommended.
Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.
100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).
Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified.
Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)
Use Promo Code FLUID-CAT for Free shipping for more than 25 drums of 20L.
Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines
- Usage: Engine without aftertreatment systems
- Drainage interval: up to 500h
- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7
- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD
- Viscosity SAE: 15W40
Yacco VX 500 SAE 10W40 is a synthetic technology oil for high performance gasoline and diesel engines. High-performance synthetic technology lubricant recommended for gasoline, diesel and LPG engines fitted with turbo or direct injection systems. Suitable for vehicles used for long motorway journeys under severe driving conditions and short journeys with frequent stop-and-go.
VDS 4.5 is a high-performance heavy-duty engine oil providing outstanding protection and fuel economy. VDS-4.5 delivers improved engine cleanliness and protection against piston deposits through the use of high-quality base oils and additive components. VDS-4.5 is available in two viscosities. VDS 4.5 15W40 and VDS-4.5 10W-30. VDS-4.5 10W-30 is recommended for some newer engines (e.g. Stage V engines) to further improve durability and fuel economy.
Always refer to the operators manual/service bulletin.
Viscosity: SAE 10W-30
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/CI-4/ECF-3/ACEA E9/E7
Yacco GALAXIE SAE 15W50 is a 100% synthetic PAO & Ester based racing oil. Yacco GALAXIE SAE 15W50 is a 100% synthetic oil made from synthetic polyalphaolefins (PAO) and ester base oils of a high molecular weight, ensuring optimal lubrication under extreme service conditions. Recommended for highly stressed sports and grand touring engines used on roads or race tracks. Initially developed for gasoline engines, regardless of whether they are turbocharged or multi-valve, this oil is also suitable for diesel engines. Also suitable for any engine for which the manufacturer recommends the use of SAE 15W50 oil which meets API SG, SH, SJ, SL, SM, SN, ACEA A3/B3 or A3/B4 specifications.
Heavy Duty Diesel Engine Oil
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
Free delivery to France if order is of 500L of CAT fluids minimum (Coolant, Oil, Cleaner)
Use Promo Code FLUID-CAT for Free shipping for more than 25 drums of 20L.
Cat® Diesel Engine Oil is used as standard factory-fill oil for Cat machines
- Usage: Engine without aftertreatment systems
- Drainage interval: up to 500h
- Meet requirements of: API CI-4 / CAT ECF-2 / CH-4/SL / ACEA E7
- Quality level: API CG-4 / CF-4/CF, ACEA A2, Volvo VDS-3, Mack EO-M Plus, MAN M 3275-1, MB 228.3, Cummins CES 20077/20076/20072/20071, Renault Trucks RLD
- Viscosity SAE: 15W40
Yacco BVX LS 1000 SAE 75W140 is a 100% synthetic oil for gearboxes and axles. 100% synthetic long life oil for highly stressed gearboxes and drive axles. Particularly recommended for self-locking and limited slip differentials. Various uses: sports and racing cars, 4WD vehicles, construction, agricultural and industrial vehicles, etc.
Français
