Français
Availability: 20 In Stock
Premium 01017991 for optimal performance and reliability.
There are 33 products.
Availability: 19 In Stock
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4 Reliable and high-quality 81296515 for best results.
Availability: 19 In Stock
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4 Reliable and high-quality 81296516 for best results.
Availability: 20 In Stock
Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.
DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1 Reliable and high-quality 81296518 for best results.
Availability: 19 In Stock
Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.
DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1 Reliable and high-quality 81296519 for best results.
Availability: 40 In Stock
Premium 81296555 for optimal performance and reliability.
Availability: 40 In Stock
Premium 81296556 for optimal performance and reliability.
Availability: 20 In Stock
Premium diesel engine oil for the latest generation of DEUTZ engines with exhaust gas aftertreatment.
DEUTZ DQC IV-10 LA - ACEA E9/E7/E6 - API CI-4 - JASO DH-2 Reliable and high-quality 81298297 for best results.
Availability: 1 In Stock
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN Reliable and high-quality 23211290 for best results.
Availability: 26 In Stock
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853 Reliable and high-quality 23909460 for best results.
Availability: 7 In Stock
LUBE F SAE 5W30 is a 100% synthetic fuel economy engine oil. LUBE F SAE 5W30 is specifically developed to meet the Ford WSS-M2C913-D & ST JLR.03.5003 specifications. LUBE F SAE 5W30 is suitable for most FORD & Jaguar Land Rover diesel /gasoline engines.* LUBE F SAE 5W30 is also recommended when the manufacturer recommends these FORD/JLR specifications or the use of ACEA A5/B5, API SL/CF oil (Honda, Kia, Mazda, Volvo, etc.). Reliable and high-quality 335LF5W30 for best results.
Availability: 1 In Stock
Yacco Lube FR+ SAE 5W30 is a 100% Synthetic Fuel Economy « Mid SAPS » oil for gasoline and diesel engines. Yacco Lube FR+ SAE 5W30 is specifically developped to meet the PSA B71 2290 and Renault RN-17 5W-30 specifications. These stringent specifications apply to Peugeot, Citroën, DS and Renault, Dacia vehicles. They help to improve fuel efficiency and allow to reduce O2 emissions. This oil can be used in other gasoline and diesel engines where SAE 5W-30 grade ACEA C2 or C3, or API oils are specified by the manufacturer. Reliable and high-quality 335LFR5W30 for best results.
Availability: 2 In Stock
Yacco Lube W SAE 0W30 is a 100% synthetic “MID SAPS” oil for diesel and gasoline engines.
Yacco Lube W SAE 0W30 is a 100 % synthetic oil with “Mid SAPS” technology for diesel engines (with or without DPF ) and gasoline engines (with or without turbocharger), designed for recent vehicles (from Euro 4).
Yacco Lube W SAE 0W30 specifically recommended for Volkswagen Group vehicles manufactured after 2000 (except R5/V10 engines). Also compatible with many other OEM engines which require a SAE 0W 30 ACEA C3 lubricant (Subaru, Suzuki, Mitsubishi, Mazda, Honda…). Reliable and high-quality 335LW0W30 for best results.
Availability: 12 In Stock
Yacco LUBE RN17 SAE 5W30 is a 100% synthetic “Mid SAPS” oil for gasoline and diesel engines. Specifically developed to meet the new Renault RN-17 5W-30 specification required by certain gasoline and diesel Renault engines manufactured from 2018 onwards. Backward compatible with older engines when the manufacturer is referring to RN0710 or RN0700 oils, except RS engines (Renault Sport). For RS and Alpine engines, use Renault RN17 RSA approved Yacco GALAXIE A SAE 0W40 lubricant . For diesel DPF engines up to Euro6d-temp series, use exclusively RN0720 oil (Yacco LUBE R 5W30). Can be used where SAE 5W-30 grade ACEA C3 oil is specified by the manufacturer. Reliable and high-quality 335LR5W30RN17 for best results.
Availability: 6 In Stock
Yacco SUPER TRANSHYD 400 HV46 is a high viscosity index, anti-wear hydraulic oil. Specifically designed for lubricating hydraulic systems used under severe service conditions. Available in several viscosities to meet OEM requirements and service conditions. Particularly recommended for construction equipment* used outdoors, all year round. Also suitable for forklifts, industrial equipment and with hydrostatic drive. Reliable and high-quality 335LHV46 for best results.
Availability: 12 In Stock
Yacco TRANSPRO 40 SAE 15W40 is a mineral oil for diesel engines. Mineral oil developed to meet the strict technical requirements of Euro 5 & Euro 6 or Tier 4 & Tier 3 low-emission diesel engines without DPF and using SCR technology (AdBlue). Suitable for most supercharged and naturally aspirated diesel engines which run on high or low sulphur fuel: lorries, construction and agricultural equipment, stationary engines, generators, marine engines, etc. It is also suitable for gasoline engines in mixed fleets of vehicles where the manufacturer recommends the use of API SL or ACEA A3/B4, ACEA/B3 SAE 15W-40 oil. Reliable and high-quality 335L15W40 for best results.
Availability: 1 In Stock
Yacco VX 500 SAE 10W40 is a synthetic technology oil for high performance gasoline and diesel engines. High-performance synthetic technology lubricant recommended for gasoline, diesel and LPG engines fitted with turbo or direct injection systems. Suitable for vehicles used for long motorway journeys under severe driving conditions and short journeys with frequent stop-and-go. Reliable and high-quality 335L10W40 for best results.
Availability: Out of stock
VDS 4.5 is a high-performance heavy-duty engine oil providing outstanding protection and fuel economy. VDS-4.5 delivers improved engine cleanliness and protection against piston deposits through the use of high-quality base oils and additive components. VDS-4.5 is available in two viscosities. VDS 4.5 15W40 and VDS-4.5 10W-30. VDS-4.5 10W-30 is recommended for some newer engines (e.g. Stage V engines) to further improve durability and fuel economy.
Always refer to the operators manual/service bulletin.
Viscosity: SAE 10W-30
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/CI-4/ECF-3/ACEA E9/E7 Reliable and high-quality 17488420 for best results.
Availability: Out of stock
High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance. Reliable and high-quality 22479647 for best results.
Availability: Out of stock
High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance. Reliable and high-quality 22479648 for best results.
Availability: Out of stock
Yellow VCS coolant
Specially formulated high performance coolant (OAT)
for new generation Volvo Penta engines.
The advantages of Volvo Penta VCS coolant:
• Prevents freezing and overheating.
• Guarantees maximum protection against corrosion, cavitation and the accumulation of deposits.
• Prevents any damage to internal engine components, thus optimizing its lifespan.
• Renewal period: every four years. Reliable and high-quality 22567233 for best results.
Availability: Out of stock
High performance fully synthetic transmission oils, specially designed to ensure excellent load capacity on a wide operating temperature range. Ensure performance optimum reversing control and maximum protection against wear and corrosion. They contain high marine additives totally exclusive tech to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help ensure proper operation of the drive unit while maintaining its long-term performance. Reliable and high-quality 22574246 for best results.
Availability: Out of stock
VDS 4.5 is a high-performance heavy-duty engine oil providing outstanding protection and fuel economy. VDS-4.5 delivers improved engine cleanliness and protection against piston deposits through the use of high-quality base oils and additive components. VDS-4.5 is available in two viscosities. VDS 4.5 15W40 and VDS-4.5 10W-30. VDS-4.5 10W-30 is recommended for some newer engines (e.g. Stage V engines) to further improve durability and fuel economy.
Always refer to the operators manual/service bulletin.
Viscosity: SAE 10W-30
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/CI-4/ECF-3/ACEA E9/E7 Reliable and high-quality 23068339 for best results.
Availability: Out of stock
For power steering, Power Trim leveling system and inverters HS. Protects against wear, even at high temperatures. Offer also very good corrosion protection. Remark ! Should never be used when API GL-5 oil is recommended. ATF oil, type Dexron III.
Old references: 85122800 / 1161995 Reliable and high-quality 23909465 for best results.
Availability: Out of stock