Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
There are 20 products.
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.
DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1
Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.
DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1
Premium diesel engine oil for the latest generation of DEUTZ engines with exhaust gas aftertreatment.
DEUTZ DQC IV-10 LA - ACEA E9/E7/E6 - API CI-4 - JASO DH-2
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN
Product discontinued and replaced by VDS 4.5.
VDS-3 covers even more stringent requirements on the cleanliness of the pistons and the displacement glazing compared to the VDS-2,
ensuring the longevity and reliability of your engine.
The high quality of VDS-3 oil allows, in certain cases, to increase the intervals of the drains.
Viscosity: SAE 15W-40
Quality: VDS-3, API CI-4, ACEA E5
Old references: 22479638 / 22479642 / 22479643
Yacco ATF X is a synthetic fluid for automatic transmissions.
Lubricating fluid for automatic transmissions, power steering and hydraulic systems of many types of vehicles, such as passenger cars, light commercial vehicles, lorries, buses, construction equipment, agricultural equipment, boats, etc.
Specifications
Yacco ATF X meets the main OEM’s specifications and has a wide range of uses (see table of specifications).
Yacco ATF X can replace 3 types of our ATF fluids: YACCO ATF III, YACCO ATF D and YACCO ATF A while also adapted for many other applications.
For DCT (DSG) transmissions, refer to YACCO ATF DCT. For CVT transmissions, refer to YACCO ATF CVT.
Yacco ATF X FE is a fuel economy synthetic fluid for automatic transmissions.
100% synthetic fluid for automatic transmissions and power steering systems in passenger cars and light commercial vehicles. Particularly recommended for multi-speed automatic gearboxes (up to 8 and 9 speed transmissions) requiring a low viscosity ATF for better fuel economy and lower CO2 emissions.
Specifications
Yacco ATF X FE meets the specifications of the main OEMs and covers a wide range of uses (see table of specifications).
Yacco TRANSPRO 40 SAE 15W40 is a mineral oil for diesel engines. Mineral oil developed to meet the strict technical requirements of Euro 5 & Euro 6 or Tier 4 & Tier 3 low-emission diesel engines without DPF and using SCR technology (AdBlue). Suitable for most supercharged and naturally aspirated diesel engines which run on high or low sulphur fuel: lorries, construction and agricultural equipment, stationary engines, generators, marine engines, etc. It is also suitable for gasoline engines in mixed fleets of vehicles where the manufacturer recommends the use of API SL or ACEA A3/B4, ACEA/B3 SAE 15W-40 oil.
Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.
100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).
Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified.
Yacco VX 500 SAE 10W40 is a synthetic technology oil for high performance gasoline and diesel engines. High-performance synthetic technology lubricant recommended for gasoline, diesel and LPG engines fitted with turbo or direct injection systems. Suitable for vehicles used for long motorway journeys under severe driving conditions and short journeys with frequent stop-and-go.
Extremely low viscosity oil for diesel engines based on HC synthetic oil to meet the largest solicitations.
DEUTZ DQC III-10ACEA E7/B4/B3/A3API CI-4Global DHD-1JASO DH-1
Premium diesel engine oil for the latest generation of DEUTZ engines with exhaust gas aftertreatment.
DEUTZ DQC IV-10 LA - ACEA E9/E7/E6 - API CI-4 - JASO DH-2
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853