Français
Availability: 20 In Stock
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
Marine & Industrial Engines Parts & Service in South of France.
Temporary closure: Bank Holiday BridgeOur store as well as order shipments will be closed from 05/08/20204 to 05/10/2024 inclusive. Thank you for your understanding.
There are 11 products.
Availability: 19 In Stock
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
Availability: 1 In Stock
Product discontinued and replaced by VDS 4.5.
VDS-3 covers even more stringent requirements on the cleanliness of the pistons and the displacement glazing compared to the VDS-2,
ensuring the longevity and reliability of your engine.
The high quality of VDS-3 oil allows, in certain cases, to increase the intervals of the drains.
Viscosity: SAE 15W-40
Quality: VDS-3, API CI-4, ACEA E5
Old references: 22479638 / 22479642 / 22479643
Availability: 9 In Stock
Yacco BVX 600 SAE 75W90 is a synthetic high performance oil for manual transmissions.
Suitable for all manual transmissions (gearboxes, drive axles and differential gears) in passenger cars and light commercial vehicles where SAE 75W90 or SAE 80W90 oil is recommended by the manufacturer. Particularly recommended for the gearboxes and drive axles of modern vehicles with gear shifting issues during start up and highly stressed transmission units.
Availability: 12 In Stock
Yacco TRANSPRO 40 SAE 15W40 is a mineral oil for diesel engines. Mineral oil developed to meet the strict technical requirements of Euro 5 & Euro 6 or Tier 4 & Tier 3 low-emission diesel engines without DPF and using SCR technology (AdBlue). Suitable for most supercharged and naturally aspirated diesel engines which run on high or low sulphur fuel: lorries, construction and agricultural equipment, stationary engines, generators, marine engines, etc. It is also suitable for gasoline engines in mixed fleets of vehicles where the manufacturer recommends the use of API SL or ACEA A3/B4, ACEA/B3 SAE 15W-40 oil.
Availability: Out of stock
High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance.
Availability: Out of stock
High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance.
Availability: Out of stock
High performance fully synthetic gear oils, specially formulated to ensure excellent load carrying capacity over a wide operating temperature range. Provides optimum shift control performance and maximum protection against wear and corrosion. They contain totally exclusive high-tech marine additives to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help to ensure that the drive unit operates correctly while maintaining its long-term performance.
Availability: Out of stock
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853
Availability: Out of stock
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853
Availability: Out of stock
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853