Français
Availability: 20 In Stock
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
There are 14 products.
Availability: 19 In Stock
Very low viscosity engine oil for highly supercharged diesel engines
DEUTZ DQC II-10 ACEA E7 API CI-4
Availability: 1 In Stock
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN
Availability: 28 In Stock
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853
Availability: 9 In Stock
Yacco BVX LS 1000 SAE 75W140 is a 100% synthetic oil for gearboxes and axles. 100% synthetic long life oil for highly stressed gearboxes and drive axles. Particularly recommended for self-locking and limited slip differentials. Various uses: sports and racing cars, 4WD vehicles, construction, agricultural and industrial vehicles, etc.
Availability: 9 In Stock
Yacco LUBE P SAE 0W20 is a 100% synthetic “Mid SAPS” oil for diesel and gasoline engines. 100% synthetic high performance fuel economy oil for diesel and gasoline engines in passenger cars and light commercial vehicles. Specifically designed for the most recent PSA GROUP (Peugeot/Citroën/DS) engines which require PSA B71 2010 oil: BlueHDi, Pure Tech, hybrid engines, engines equipped with a Stop & Start system, etc. This ACEA C5 oil is also suitable for diesel and gasoline engines from other car manufacturers which require the use of ACEA C5 SAE 0W20 oil.
Availability: 12 In Stock
Yacco TRANSPRO 40 SAE 15W40 is a mineral oil for diesel engines. Mineral oil developed to meet the strict technical requirements of Euro 5 & Euro 6 or Tier 4 & Tier 3 low-emission diesel engines without DPF and using SCR technology (AdBlue). Suitable for most supercharged and naturally aspirated diesel engines which run on high or low sulphur fuel: lorries, construction and agricultural equipment, stationary engines, generators, marine engines, etc. It is also suitable for gasoline engines in mixed fleets of vehicles where the manufacturer recommends the use of API SL or ACEA A3/B4, ACEA/B3 SAE 15W-40 oil.
Availability: 2 In Stock
Yacco VX 1000 FAP SAE 5W40 is a 100 % synthetic oil for gasoline and diesel engines, “Mid SAPS” technology.
100% synthetic SAE 5W40 “Mid SAPS ” lubricant for gasoline and diesel engines. Provides extended service life to particulate filters (DPF).
Yacco VX 1000 FAP SAE 5W40 is approved by several car manufacturers, including the VW505.01 special Volkswagen specification for pump injector unit (PD VX1000 FAP SAE 5W40 covers a wide range of application where the use of a low viscosity oil grades like SAE 5W30/5W20/0W20 is not specified.
Availability: Out of stock
High performance fully synthetic transmission oils, specially designed to ensure excellent load capacity on a wide operating temperature range. Ensure performance optimum reversing control and maximum protection against wear and corrosion. They contain high marine additives totally exclusive tech to minimize damage due to water contamination. All these characteristics give them decisive advantages over conventional transmission oils and help ensure proper operation of the drive unit while maintaining its long-term performance.
Availability: Out of stock
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN
Availability: Out of stock
A fully synthetic oil specially developed for high performance petrol engines. Retaining its qualities over a wide temperature range, it maximizes engine life. The additive is designed to provide wear protection and minimize sludge and deposit buildup. Particularly suitable for engines equipped with a catalytic converter but can also be used on engines without a catalytic converter from model year 2008.
Viscosity: SAE 5W-40
Quality: ACEA C3, API SN
Availability: Out of stock
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853
Availability: Out of stock
VDS-4.5 15W40 is a heavy-duty engine oil with a specific formulation that incorporates exclusive additives. It is recommended for use in modern diesel engines regardless of operating conditions and type of environment. It is therefore perfectly compatible with all Volvo Penta engines previously lubricated with VDS-2, VDS-3 or VDS-4 oils. It is also recommended for certain gasoline engines.
Refer to the user manual.
Viscosity: SAE 15W-40
Grade: VDS-4.5 API CK-4/CJ-4/CI-4 Plus/
CI-4/ ECF-3 / ACEA E9 / E7
Old references: 23039848 / 23039851 / 23039853
Availability: Out of stock
Product discontinued and replaced by VDS 4.5.
VDS-3 covers even more stringent requirements on the cleanliness of the pistons and the displacement glazing compared to the VDS-2,
ensuring the longevity and reliability of your engine.
The high quality of VDS-3 oil allows, in certain cases, to increase the intervals of the drains.
Viscosity: SAE 15W-40
Quality: VDS-3, API CI-4, ACEA E5
Old references: 22479638 / 22479642 / 22479643